SHEET 1 OF 1
LDCFDLT_A
SCALE: 2:1
TITLE:
SIZE
DWG. NO.
REV
DO NOT SCALE DRAWING
ANGLES:
1
TOLERANCES:
.020 [0.50]-.200 [5.00]=
.008 [0.20]
.200 [5.00]-1.200 [30.00]=
.016 [0.40]
1.20 [30.0]-4.75 [120.0]=
.024 [0.60]
4.75 [120.0]-12.40 [315.0]=
.040 [1.0]
DRAWN:
ENGR:
DT:
DT:
MATERIAL:
FINISH:
PROJECTION:
:
THIS DRAWING CONTAINS PROPRIETARY INFORMATION
THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE
TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS
DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE
EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS
DESIGNATED AGENTS.
159 ORT LANE
MERLIN, OR 97532
C
MCX FEMALE CABLE END CRIMP
FOR RG174 CABLE
CONMCX011
11-JUL-12
B.MURPHY
S.HOGAN
11-JUL-12
REVISIONS
REV
DESCRIPTION
DATE
APPV
B
Added new title block and heat shrink; updated instructions 11-JUL-12 SAH
Descripon Material Finish
Body
Socket
Insulaon
Gold
N/A
Gold
PTFE
Crimp Ring GoldBrass
Heat Shrink BlackPolyolefin
Brass
BE CU
Ø0.102
[2.60]
0.382
[9.70]
0.575
[14.60]
Ø0.197
[5.00]
SIDE VIEW
Ø0.154
[3.90]
0.276
[7.00]
CRIMP RING
0.189
[4.80]
0.102
[2.60]
RECOMMENDED CABLE STRIPPING DIMENSIONS
0.079
[2.00]
RG-174 Cable
Ø0.197
[5.00]
0.787
[20.00]
HEAT SHRINK
Ø0.037
[0.95]
0.244
[6.20]
PIN CHUCK
0.2x2x2 GROOVE
SOCKET
3. Solder the socket to the center conductor.
4. Insert the socket and center conductor into the body
5. Wrap the braid around the tail of the body and crimp the ring with a
0.128” hex crimp tool (or one labeled for use with RG-174 cable).
CONMCX011 ASSEMBLY INSTRUCTIONS
6. Use heat shrink to cover crimp.
1. Strip cable to recommended dimensions.
2. Slip heat shrink and crimp ring onto stripped cable.
until the socket snaps in.
NOTES: (UNLESS OTHERWISE SPECIFIED)
1. ALL DIMENSIONS ARE IN INCHES [mm].
2. DIMENSIONS APPLY AFTER FINISHING.
3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE, USE
MATERIALS THAT DO NOT CONTAIN REACH SUBSTANCES OF VERY
HIGH CONCERN >1000ppm, AND USE DRC CONFLICT-FREE
SOURCED MATERIALS.
4. SAFETY BREAK ALL SHARP CORNERS AND EDGES .02 MAXIMUM.
C
Updated Assembly Instruction 4 and Note 3 2-NOV-17 CLL
