ADM7154CP-3.3EVALZ/ADM7154RD-
1.8EVALZ/ADM7155CP-02-EVALZ User Guide
UG-696
One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Te l: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Evaluating the ADM7154 and ADM7155 Linear Regulators
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 9
REGULATOR FEATURES
Input voltage range: 2.3 V to 5.5 V
Maximum output current: 600 mA
Low noise
0.9 μV rms total integrated noise from 100 Hz to 100 kHz
1.6 μV rms total integrated noise from 10 Hz to 100 kHz
Initial accuracy: ±0.5%
Fixed 3.3 V (ADM7154) and adjustable (ADM7155) output
versions
8-lead LFCSP and 8-lead SOIC packages
EVALUATION KIT CONTENTS
ADM7154CP-3.3EVALZ, ADM7154RD-1.8EVALZ, or
ADM7155CP-02-EVALZ evaluation board
ADDITIONAL EQUIPMENT NEEDED
DC power supply
Multimeters for voltage and current measurements
Electronic or resistive loads
GENERAL DESCRIPTION
The ADM7154CP-3.3EVALZ, ADM7154RD-1.8-EVALZ, and
ADM7155CP-02-EVALZ evaluation boards are used to
demonstrate the functionality of the ADM7154 and ADM7155
linear regulators, respectively.
Simple device measurements, such as line and load regulation,
dropout, and ground current, can be demonstrated with just a
single voltage source, a voltmeter, an ammeter, and load resistors.
For more details about the linear regulators, refer to the
ADM7154 and ADM7155 data sheets.
EVALUATION BOARDS
Figure 1. ADM7154CP-3.3EVALZ and ADM7155CP-02-EVALZ LFCSP
Evaluation Board
Figure 2. ADM7154RD-1.8EVALZ LFCSP Evaluation Board
12323-001
12323-002