4© 2009 Semtech Corp.
www.semtech.com
PROTECTION PRODUCTS
uClamp1211T
Circuit Diagram
Device Connection Options
These TVS diodes are designed to protect one data,
I/O, or power supply line. The device is bidirectional
and may be used on lines where the signal polarity can
go above and below ground.
Circuit Board Layout Recommendations for Suppres-
sion of ESD.
Good circuit board layout is critical for the suppression
of ESD induced transients. The following guidelines are
recommended:
z Place the TVS near the input terminals or connec-
tors to restrict transient coupling.
z Minimize the path length between the TVS and the
protected line.
z Minimize all conductive loops including power and
ground loops.
z The ESD transient return path to ground should be
kept as short as possible.
z Never run critical signals near board edges.
z Use ground planes whenever possible.
Applications Information