Management Interface
The management interface for this PDU model is transitioning to a new technology platform. The new
interface can be distinguished by a USB-A port (for EnviroSense2 modules) in place of the
round ENVIROSENSE port. For managing the units containing the round port, Tripp Lite recommends
using the PowerAlert Console Launcher rather than a web browser. This application enables local access
of the PDU using a self-contained, compatible Java Runtime Environment version. The Console Launcher
can be downloaded for free; click the above link or go to the Management Solutions / Utilities page. Units
with the new interface work will with most current web browsers.
1.9kW Single-Phase ATS / Switched PDU with LX
Platform Interface, 120V Outlets (16 5-15/20R), 2
L5-20P / 5-20P 12ft 120V Inputs, 1U Rack-Mount,
TAA
MODEL NUMBER: PDUMH20ATNET
Description
Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded
network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power
sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input
cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the
secondary power source until the primary input is restored and stable. Built-in LX Platform network
management interface card. The Java-free LX Platform HTML5-based network interface enables full
remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or
SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network.
Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring
capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet,
SSH, FTP, DHCP and NTP. Switched PDU features include individually controllable output receptacles
and built-in network interface. Super-fast switchover between primary and secondary power sources
occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources,
regardless of phase angle, to support a variety of advanced redundant power networking applications.
Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant
UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the
primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite
SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS
configurations utilizing separate mains circuits, backup generators and even separate utility power grid
feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input
sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary
source. Front input LED's display primary or secondary power availability.
Features
Highlights
1.9kW 120V ATS / Switched
PDU, Single phase 20A 120V
●
Enables redundant A/B power
option for single-corded network
devices
●
Separate primary & secondary
inputs connect to any two
compatible power sources
●
1U horizontal rackmount; 2 L5-
20P / 5-20P inputs; 16 5-15/20R
outlets
●
Switched outlets, Built-in LX
Platform network interface; Two
digit visual current meter
●
Temperature, humidity and
contact closure monitoring
options
●
TAA Compliant
●
Package Includes
ATS / Switched PDU with
attached L5-20P input power
cord
●
Detachable C19 to NEMA L5-
20P 12 ft/3.6m secondary input
cord
●
Two NEMA L5-20R to NEMA 5-
20P plug adapters
●
Installable 1U mounting
brackets
●
User manual with warranty
information
●
1 / 4
