Ohmite Mfg. Co. 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 29
Standard part numberS for pc-58 SerieS
Ohmic value
R3J––– 3
R5J––– 5
Wattage
Part No.
Prefix
Suffix
PC-58 Series
Tubular Radial Terminal
Wirewound for PC Board Applications
FEATURES
• Radial construction for direct
insertion into printed circuit
boards; fit standard 0.10 inch
matrix boards with standard
0.046 inch diameter holes.
Provides a built in stand-off to
reduce board temperature.
• Space saving radial terminals
reduce the total length require-
ment compared to axial terminal
resistors and increase packaging
density possibilities.
• Flame resistant lead free vitre-
ous enamel coating.
• RoHS compliant; add “E” suffix
to part number to specify.
Dimensions (in. / mm)
Series Wattage Ohms Length Height Diam. Dim. A Voltage
R3 (vitreous) 3 1-3.9K 0.438 / 11.13 0.469 / 11.91 0.313 / 7.95 0.30 / 7.62 103
(silicone) 4K-10K
R5 (vitreous) 5.25 1-7.4K 0.625 / 15.88 0.516 / 13.11 0.344 / 8.74 0.50 /12.70 187
(silicone) 7.5K-20K
1 1R0
1.5 1R5
2 2R0
2.4 2R4
3 3R0
3.9 3R9
5 5R0
5.1 5R1
5.6 5R6
7.5 7R5
10 10R
15 15R
18 18R
20 20R
22 22R
25 25R
30 30R
40 40R
50 50R
51 51R
56 56R
68 68R
75 75R
82 82R
100 100
120 120
150 150
160 160
200 200
220 220
250 250
270 270
300 300
330 330
350 350
390 390
400 400
430 430
500 500
510 510
560 560
600 600
620 620
750 750
800 800
820 820
910 910
1000 1K0
1200 1K2
1300 1K3
1500 1K5
1800 1K8
2000 2K0
2200 2K2
2400 2K4
2500 2K5
2700 2K7
3000 3K0
3300 3K3
3900 3K9
4700 4K7
5000 5K0
5600 5K6
6200 6K2
6800 6K8
7500 7K5
8200 8K2
9000 9K0
9100 9K1
10,000 10K
12,000 12K
15,000 15K
20,000 20K
= Standard values
Values above 3.9K
(3W) and 8.2K (5W)
involve very fine
resistance wire and
should not be used
in critical applica-
tions without burn-
in and/or thermal
cycling.
Values above 4.7K
(3W) and 7.5K (5W)
supplied in silicone-
ceramic coatings
instead of vitreous
enamel.
A ±0.010" 0.031" min.
0.79 mm
L ±0.016"
H ±0.031"
0.25"±0.031
6.35 mm
±
0.794
D
max.
SPECIFICATIONS
Material
Core: Ceramic.
Coating: Vitreous enamel except
for values above 4.7K (3W) and
7.5K (5W), which are supplied in
silicone-ceramic coatings.
Terminals: Solder coated radial.
#20 ga. tinned terminals require
0.046 in. (1.168 mm) holes (2).
RoHS solder composition is 96%
Sn, 3.5% Ag, 0.5% Cu
Derating: Linearly from
100% @ +25°C to 0% @
+350°C.
Note: Values above 3.9K (3W)
and 8.2K (5W) involve very fine
resistance wire and should not
be used in critical applications
without burn-in and/or thermal
cycling.
Electrical
Tolerance: ±5% (J)
(other tolerances available).
Power rating: Based on 25°C free
air rating.
Overload:
3 watt: 5 times rated wattage for
5 seconds.
5.25 watt: 10 times rated watt-
age for 5 seconds.
Temperature coefficient: ±260
ppm/°C.
To calculate max. amps: use the
formula √P/R.
Ohmic value
R3J––– 3
R5J––– 5
Wattage
Part No.
Prefix
Suffix
Ohmic value
R3J––– 3
R5J––– 5
Wattage
Part No.
Prefix
Suffix
Ohmic value
R3J––– 3
R5J––– 5
Wattage
Part No.
Prefix
Suffix
ordering information
R5J1K0E
Ohm Value
Example:
1R0 = 1.0Ω
10R = 10.0Ω
250 = 250Ω
4K7 = 4,700Ω
Tolerance
J=5%
PC-58
Series
Wattage
RoHS
Compliant
Check product availability at www.ohmite.com
Our friendly Customer
Service team can be
reached at 866-9-OHMITE