https://www.phoenixcontact.com/pi/products/1621558
04/30/2017Page2/3
Coupler connector-SH-8EPS48A9LB1S-1621558
Technical data
Data of the insulating body
Litz wire cross section of power contacts min. 0.25 mm²
Litz wire cross section of power contacts max. 4 mm²
Nominal current per power contact at 25°C 30 A
Nominal voltage, power contact 630 V AC
Rated surge voltage 6 kV
Contact diameter of signal contacts 1 mm
Litz wire cross section of signal contacts min. 0.06 mm²
Litz wire cross section of signal contacts max. 1 mm²
Nominal current per signal contact at 25°C 8 A
Nominal voltage, signal contact 50 V
Rated surge voltage 1.5 kV
Overvoltage category III
Degree of pollution 3
Housing data
Note
Notes on operation Full occupation with 5 x 4 mm² for cable and coupler
connectors not possible.
Housing material Turned parts: copper zinc alloy (CuZn), die-cast parts: zinc (GD-Zn)
Type of locking Screw locking
Degree of protection (when plugged in) IP67
IP68
Thread type M23
Cable seal data
Min. cable diameter 15 mm
Max. cable diameter 18 mm
Environmental Product Compliance
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
Schematic diagram
Pin assignment of pin, signal
Dimensional drawing
Pin version: dimension A = 4.7 mm, socket version: dimension A = 0 mm
