DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
DO NOT
SCALE FROM
THIS PRINT
HDBNC-J-P-XX-ST-EM1
GENDER
-J: JACK
TYPE
-P: PCB
ORIENTATION
-ST: STRAIGHT
TERMINATION
-EM1: EDGE MOUNT .062 BOARD
PLATING SPECIFICATION
-HF: 30µ" GOLD CENTER CONTACT,
3µ" GOLD OUTER CONTACT
-HN: 30µ" GOLD CENTER CONTACT,
100µ" NICKEL OUTER CONTACT
-GF: 10µ" GOLD CENTER CONTACT,
3µ" GOLD OUTER CONTACT
-GN: 10µ" GOLD CENTER CONTACT,
100µ" NICKEL OUTER CONTACT
(SEE TABLE 1)
11.25 .443
REF
17.50 .689
REF
4.75 .187
REF
5.51 .217
REF
4.55 .179
REF
12.75 .502
REF
6.50 .256
REF
"A"
"A"
1/4-36 UNS-2A
REF
0.60
REF
.024
0.43
REF
.017
14.91 .587
REF
(TO SOCKET)
0.45
REF
.018
(TO INSULATOR)
SECTION "A"-"A"
1
2
(SEE NOTE 4)
0.30
(2 PLCS)
.012
REF
1.80
(2 PLCS)
.071
REF
7.50
REF
.295
4.50
REF
.177
5.63
REF
.221
(ON FLAT)
6.25
REF
.246
6.50 .256
5.90 .232
RECOMMENDED MOUNTING HOLE
2.70 [.079] MAX PANEL THICKNESS
4.90 .193
(2 PLCS)
1.91 .075
(2 PLCS)
7.58 .298
0.70 .028
2.30 .091
RECOMMENDED PCB LAYOUT
(SEE NOTE 5 & 6)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
X.X:
0.3 [.01] 5
X.XX:
0.13 [.005]
X.XXX:
0.051 [.0020]
MATERIAL:
HD BNC 75 OHM, ST JACK EDGE MOUNT
BY:
HDBNC-J-P-XX-ST-EM1
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
ALVIN W
02/11/2011
1
1
SHEET SCALE: 4:1
F:\DWG\MISC\MKTG\HDBNC-J-P-XX-ST-EM1 -MKT.SLDDRW
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. NOTE DELETED.
3. PRODUCT TO BE PACKAGED PER PACKING STANDARD CO-HD-WI-3040-M.
TRAY: TY-SMA-001-1
COVER: TY-SMA-001-2
4. NUT TO BE PACKAGED SEPARATELY.
5. STENCIL APERTURES TO BE 1:1 WITH THE PCB SURFACE MOUNT PADS.
STENCIL THICKNESS TO BE 0.13 [.005].
6. A FIXTURE IS RECOMMENDED DURING THE REFLOW PROCESS TO HOLD THE CONNECTOR STRAIGHT AND PARALLEL WITH THE PCB.
CONTACT IPG FOR MORE DETAILS.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
SOCKET: BeCu
SHELL, NUT: BRASS
INSULATOR: PTFE
REVISION B
