OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

RCWH080547L5FNEA

P1-P3
RCWH
www.vishay.com
Vishay Dale
Revision: 21-Jul-16
1
Document Number: 31110
For technical questions, contact: ff2cresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Thick Film Surface Mount Chip Resistors,
Wraparound, Extremely Low Value (0.01 to 0.976 )
FEATURES
• Extremely low resistance values
(0.01 to 0.976 )
• Suitable for current sensing and shunts
• Metal glaze on high quality ceramic
• Protective overglaze
• Lead (Pb)-free solder contacts on Ni barrier layer
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Notes
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
• Part marking: reference “Surface Mount Resistor Marking” (www.vishay.com/doc?20020
).
(1)
Tight tolerance of 0.5 % is available for resistance values above 0.200 .
(2)
Use E24 decade values for 5.0 % tolerance parts and E96 decade values for 0.5 % and 1.0 %. Refer to “Standard Decade” table
(www.vishay.com/doc?31001
).
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
CASE SIZE
POWER RATING
P
70 °C
W
TEMPERATURE
COEFFICIENT
± ppm/°C
RESISTANCE
RANGE
TOLERANCE
± %
E-SERIES
(2)
RCWH0805 0805 0.33
400 0.010 to 0.018 5.0 24
300 0.02 to 0.03 1.0, 5.0
24; 96200 0.033 to 0.05 1.0, 5.0
100 0.051 to 0.976 0.5, 1.0, 5.0
(1)
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: RCWH0805R499FKEA (visit www.vishay.net Vishay Dale parts numbering manual for all options)
GLOBAL MODEL
(8 digits)
VALUE
(4 digits)
TOLERANCE
(1 digit)
TCR
(1 digit)
PACKAGING
(2 digits)
RCWH0805 L = m *
R = decimal
10L0 = 0.01
R470 = 0.47
Note:
* Use “L” for resistance
values < 0.1
D = ± 0.5 %
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
K = ± 100 ppm/°C
N = ± 200 ppm/°C
M = ± 300 ppm/°C
Q = ± 400 ppm/°C
P = ± 500 ppm/°C
T = ± 600 ppm/°C
G = ± 700 ppm/°C
EA = lead (Pb)-free,
tape / reel
TECHNICAL SPECIFICATIONS
PARAMETER UNIT RCWH0805
Operating temperature range °C -55 to +155
Maximum operating voltage V (P x R)
1/2
Insulation voltage U
ins
(1 min) V > 200
Insulation resistance > 10
9
Weight/1000 pieces (typical) g 5.5
WH 0 8 5 R 40RC K9 FE9 A
RCWH
www.vishay.com
Vishay Dale
Revision: 21-Jul-16
2
Document Number: 31110
For technical questions, contact: ff2cresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DERATING
Note
• Embossed carrier tape per EIA-481-1A.
DIMENSIONS
RCWH0805
MODEL
DIMENSIONS in millimeters SOLDER PAD DIMENSIONS in millimeters
RESISTANCE
RANGE
LWHT1T2 a b l
RCWH0805
0.01 to 0.03
2.0 ± 0.15 1.3 ± 0.1 0.55 ± 0.1
0.6 ± 0.2
0.35 ± 0.2
1.0 1.4 0.6
0.033 to 0.976 0.4 ± 0.2 0.8 1.4 1.0
PERFORMANCE
TEST CONDITIONS OF TEST TEST LIMITS
Thermal shock MIL-STD-202, method 107, -55 °C to +125 °C, 300 cycles at each extreme ± (1.0 % + 0.0005 )
Short time overload 2 x rated power; duration according the model ± (0.5 % + 0.0005 )
High temperature exposure MIL-STD-202, method 108, 1000 h at T = 125 °C, 0 % power ± (2.0 % + 0.0005 )
Temperature cycling JESD 22, method JA-104, 1000 cycles (-55 °C to +125 °C) ± (2.0 % + 0.0005 )
Biased humidity MIL-STD-202, method 103, 1000 h 85 °C/85 % RH, 10 % x (P x R)
1/2
± (2.0 % + 0.0005 )
Mechanical shock MIL-STD-202, method 213, condition C, 10 g’s, 6 ms (half sine), 3 directions ± (1.0 % + 0.0005 )
Vibration MIL-STD-202, method 204, 5 g’s, 20 min, 12 cycles, 3 directions, 10 Hz to 2000 Hz ± (1.0 % + 0.0005 )
Operational life MIL-STD-202, method 108, 1000 h at T = 125 °C at rated power ± (2.0 % + 0.0005 )
Resistance to solder heat
MIL-STD-202, method 210, +260 °C solder, 10 s to 12 s dwell, 25 mm/s
emergence
± (1.0 % + 0.0005 )
Moisture resistance MIL-STD-202, method 106, 0 % power, 7a and 7b not required ± (2.0 % + 0.0005 )
PACKAGING
MODEL
REEL
TAPE WIDTH DIAMETER PITCH PIECES/REEL CODE
RCWH0805 8 mm/punched paper 180 mm/7" 4 mm 5000 EA
l
b
a
70
120
100
80
60
40
20
0
-55 175
Ambient Temperature in °C
Rated Power in %
-25 0 25 75 100 125 155
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
P1-P3

RCWH080547L5FNEA

Mfr. #:
Buy RCWH080547L5FNEA
Manufacturer:
Vishay / Dale
Description:
Thick Film Resistors - SMD 0.33W .0475ohms 1% 200ppm
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet