5
Connectors (Inlets/Outlets)
6610
https://www.schurter.com /PG07
Connectors
- The above mentioned dimensions are recommended when using an assembly tool.
- When using an assembly tool we recommend the above-mentioned dimensions.
- Use the cover or an assembly tool, to push the wires into the IDC terminals.
- The assembly force depends on the wire used and may require as much as 900 N.
- Press the wires into the IDC terminals until the wires touch with the plastic socket of the 6610 when using a tool.
- When using the cover be sure that it is properly mounted.
- The maximum diameter of the wire (including insulation) is 3.6 mm for along, 3.5 mm for cross version.
- The correct installation of the wires is essential for proper function of the 6610 in the end equipment.
All Variants
Alignment
1)
Conductor cross section Panel Thickness
s [mm]
Terminal type live contact Order Number
along 1.0 mm² 2.5 IDC terminals 6610.3016.03
along 1.5 mm² / 14 AWG 1.5 IDC terminals 6610.5014
along 1.5 mm² / 14 AWG 1.5 IDC terminals 6610.5014.03
along 1.5 mm² / 14 AWG 2 IDC terminals 6610.5015
along 2.5 mm² / 12 AWG 0.8 IDC terminals 6610.1011
along 2.5 mm² / 12 AWG 1 IDC terminals 6610.1012
along 2.5 mm² / 12 AWG 1.2 IDC terminals 6610.1013
along 2.5 mm² / 12 AWG 1.5 IDC terminals 6610.1014
█
along 2.5 mm² / 12 AWG 2 IDC terminals 6610.1015
along 2.5 mm² / 12 AWG 2 IDC terminals 6610.1015.03
along 2.5 mm² / 12 AWG 2.5 IDC terminals 6610.1016
along 2.5 mm² / 12 AWG 3 IDC terminals 6610.1017
along 2.5 mm² / 12 AWG 1.5 Quick connect terminal 4.8 x 0.8 6610.1354
along 2.5 mm² / 12 AWG 1.5 Quick connect terminal 4.8 x 0.8 6610.1354.03
along 2.5 mm² / 12 AWG 1.5 Quick connect terminal 6.3 x 0.8 6610.1254
along 2.5 mm² / 12 AWG 1.5 Quick connect terminal 6.3 x 0.8 6610.1254.03
along 2.5 mm² / 12 AWG 1.5 Solder 6610.1154
cross 1.5 mm² / 14 AWG 1 IDC terminals 6610.6012
cross 1.5 mm² / 14 AWG 1.5 IDC terminals 6610.6014
cross 1.5 mm² / 14 AWG 1.5 Quick connect terminal 6.3 x 0.8 6610.6254
cross 2.5 mm² / 12 AWG 1 IDC terminals 6610.2012
cross 2.5 mm² / 12 AWG 1.2 IDC terminals 6610.2013
cross 2.5 mm² / 12 AWG 1.5 IDC terminals 6610.2014
cross 2.5 mm² / 12 AWG 1.5 IDC terminals 6610.2014.03
█
cross 2.5 mm² / 12 AWG 2 IDC terminals 6610.2015
cross 2.5 mm² / 12 AWG 2.5 IDC terminals 6610.2016
cross 2.5 mm² / 12 AWG 3 IDC terminals 6610.2017
cross 2.5 mm² / 12 AWG 1.5 Quick connect terminal 6.3 x 0.8 6610.2254
cross 2.5 mm² / 12 AWG 1.5 Solder 6610.2154
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-
SCHURTER
Articles with 1 mm² only with ENEC approval. Outer diameter of wire (including insulation) max. 3.5 / 3.6 mm.
1) The alignment describes whether the wires are along or across to the connector pin axis.
Suffix ".03" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch intended for
use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.
Packaging unit
50 Pcs