PSB 21493 F V1.7

INCA-P
P RODUCT B RIEF
Never stop thinking.
Applications
PBX Feature Phone with
full-duplex, hands-free operation,
including USB interface
Features
Two-wire transceiver with AMI
coded 2B+D channels
C166 based 16-bit CPU
Bootstrap Loader Function
On-Chip General Purpose
SRAM (4 KBytes)
On-Chip Debug System
OCDS (Level 1)
Both Power-on-Reset and Under
Voltage Detection provided
Terminal-specific Functions,
including Keypad Scanner, LED
Matrix Control, and two Pulse
Width Modulation units
12 Mbit/s Full-Speed Mode com-
plies with USB Specification V1.1
15 SW-configurable Endpoints,
as well as the bi-directional
Control Endpoint 0
Full-duplex echo cancellation
with noise reduction
Two transducer correction filters
Tone Generator
DTMF Receiver
Three differential inputs for the
handset microphone, speaker-
phone, and the headset
Three differential outputs for
a handset ear piece (200
),
a headset (200
),=and a loud-
speaker (100 mW @ 20
)
PCM A-Law/µ-Law
(ITU-T G.711) and 8/16-bit
linear data
PCM Codec is fully compatible
with the ITU-T G.712 and ETSI
(NET33) specification
INCA-P
Infineon Codec with U
PN
Transceiver and
Embedded Microcontroller featuring
Acoustic Echo Cancellation
PSB 21493
The INCA-P, PSB 21493, integrates in a single clip,
all the functions required for a high feature PBX
phone.
The line transceiver of the INCA-P implements the
subscriber access functions for a digital PBX ter-
minal to be connected to a two-wire U
PN
Interface.
The chip provides complete Layer-1 and basic
Layer-2 functions for digital terminals.
Different interfaces allow connection to a variety
of devices including a full-speed USB interface for
PC host communications.
The INCA-P is typically used in applications for
terminal equipment in which the microphone,
loudspeaker, headset, and handset can be directly
connected to the Analog Front End (AFE).
The AFE and the integrated fixpoint DSP perform
signal processing tasks such as encoding,
decoding, filtering functions, and tone generation
(ringing, audible feedback tones, and DTMF sig-
nal). A full-duplex echo cancellation mechanism
provides high quality speakerphone functionality.
Type Sales Code
INCA-P PSB 21493
Package
P-TQFP-144
P RODUCT B RIEF
How to reach us:
http://www.infineon.com
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
81541 München
© Infineon Technologies AG 2001. All Rights Reserved.
Attention please!
The information herein is given to describe certain components
and shall not be considered as warranted characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not
limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and
conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon
Technologies Representatives worldwide.
Warnings
Due to technical requirements components may contain dan-
gerous substances. For information on the types in question
please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-
support devices or systems with the express written approval
of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-sup-
port device or system, or to affect the safety or effectiveness
of that device or system. Life support devices or systems are
intended to be implanted in the human body, or to support
and/or maintain and sustain and/or protect human life. If they
fail, it is reasonable to assume that the health of the user or
other persons may be endangered.
Published by Infineon Technologies AG
IOM
Transfer
Unit
IOM
Frame
Arbiter
HDLC
CI
&
TIC
IOM-2 Interface
IOM-2 Handler
Transceiver
DSP
PIDD
Analog
Front
End
OCDSUSB
CPU
C166
RAM
X-Bus
Handset
Speaker
Key Pad LEDs
PC
Micro
Headset
PD-Bus
EBC
KEY
SCAN
LED
MUX
PWM1
PWM2
Ι
2
C SSC GPT ASC
TSF
INCA-P
Power
Controller
U
PN
Line
3.3 V
Memory
Display
123
456
789
*
0
Block Diagram
IOM
Transfer
Unit
IOM
Frame
Arbiter
HDLC
CI
&
TIC
IOM-2 Interface
IOM-2 Handler
Transceiver
DSP
PIDD
Analog
Front
End
OCDSUSB
CPU
C166
RAM
X-Bus
PD-Bus
EBC
KEY
SCAN
LED
MUX
PWM1
PWM2
Ι
2
C SSC GPT ASC
TSF
INCA-P
Application Example High-End Feature Phone
Ordering No. B115-H7882-X-X-7600
Printed in Germany
PS 05012. NB
The typical application of the
INCA-P is for terminal equipment
in which the microphone, loud-
speaker, headset, and handset
are directly connected to the
Analog Front End.
Connection between telephone
and PC offers a lot of new features
- such as internet telephony,
PC dialing and unified messaging -
that can be implemented without
additional hardware.
The INCA-P can also be used
when the line transceiver is
disabled but all other functions
are available, such as operation
in devices where an external
interface is also supported.

PSB 21493 F V1.7

Mfr. #:
Manufacturer:
Infineon Technologies
Description:
IC SPEECH/VOICE INCA-P TQFP-144
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet