SpecNo.JELF243B-9110B-01 P.7 / 10
MURATA MFG.CO., LTD
Reference Only
7.6 Marking for reel
Customer part number, MURATA part number, Inspection number(1) ,RoHS Marking(2),
Quantity etc ・・・
1) <Expression of Inspection No.>
□□ OOOO
(1) (2) (3)
(1) Factory Code
(2) Date First digit : Year / Last digit of year
Second digit: Month / Jan. to Sep. 1 to 9, Oct. to Dec. O, N, D
Third, Fourth digi : Day
(3) Serial No.
2) <Expression of RoHS Marking> ROHS – Y (△)
(1) (2)
(1)
RoHS regulation conformity parts.
(2) MURATA classification number
7.7 Marking for Outside package (corrugated paper box)
Customer name, Purchasing order number, Customer part number, MURATA part number,
RoHS Marking(2) ,Quantity, etc ・・・
7.8. Specification of Outer Case
Outer Case Dimensions
(mm)
Standard Reel Quantity
in Outer Case (Reel)
W D H
186 186 93 5
Above Outer Case size is typical. It depends on a quantity of an order.
8. △
!
Caution
8.1 Caution(Rating)
Do not exceed maximum rated current of the product. Thermal stress may be transmitted to the product and
short/open circuit of the product or falling off the product may be occurred.
8.2 Fail-safe
Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be
caused by the abnormal function or the failure of our product.
8.3 Limitation of Applications
Please contact us before using our products for the applications listed below which require especially high
reliability for the prevention of defects which might directly cause damage to the third party's life, body or
property.
(1) Aircraft equipment (6) Transportation equipment (trains, ships, etc.)
(2) Aerospace equipment
(7) Traffic signal equipment
(3) Undersea equipment (8) Disaster prevention / crime prevention equipment
(4) Power plant control equipment (9) Data-processing equipment
(5) Medical equipment (10) Applications of similar complexity and /or reliability
requirements to the applications listed in the above
9. Notice
Products can only be soldered with reflow.
This product is designed for solder mounting.
Please consult us in advance for applying other mounting method such as conductive adhesive.
9.1 Land pattern designing
a 0.4
b 1.4 to 1.5
c 0.5 to 0.6
(in mm)
a
b
Chip Coil
Land
Solder Resist
c
W
D
Label
H