TC74HC564AP/AF,574AP/AF
2014-03-01
1
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74HC564AP, TC74HC564AF
TC74HC574AP, TC74HC574AF
Octal D-Type Filp-Flop with 3-State Output
TC74HC564AP/AF Inverting
TC74HC574AP/AF Non-Inverting
The TC74HC564A and HC574A are high speed CMOS OCTAL
FLIP-FLOPs with 3-STATE OUTPUT fabricated with silicon gate
C
2
MOS technology.
They achieve the high speed operation similar to equivalent
LSTTL while maintaining the CMOS low power dissipation.
These 8-bit D-type flip-flops are controlled by a clock input
(CK) and an output enable input (
OE ).
The TC74HC564A has inverting outputs, and the
TC74HC574A has non-inverting outputs.
All inputs are equipped with protection circuits against static
discharge or transient excess voltage.
Features
• High speed: f
max
= 62 MHz (typ.) at V
CC
= 5 V
• Low power dissipation: I
CC
= 4 μA (max) at Ta = 25°C
• High noise immunity: V
NIH
= V
NIL
= 28% V
CC
(min)
• Output drive capability: 15 LSTTL loads
• Symmetrical output impedance: |I
OH
| = I
OL
= 6 mA (min)
• Balanced propagation delays: t
pLH
∼
−
t
pHL
• Wide operating voltage range: V
CC
(opr) = 2 to 6 V
• Pin and function compatible with 74LS564/574
TC74HC564AP, TC74HC574AP
TC74HC564AF, TC74HC574AF
Weight
DIP20-P-300-2.54A : 1.30 g (typ.)
SOP20-P-300-1.27A : 0.22 g (typ.)
Start of commercial production
1987-11