Tubing
Specification Control Drawing
No.:
Rev:
Date:
Page:
RMW Tubing
C
April 14, 2003
1 of 2
Tyco reserves the right to amend this specification at any time. Users should evaluate the suitability of the product for their application.
Cage Code: 06090 If this document is printed it becomes uncontrolled. Check with the web for the latest revision.
RMW
Heat-Shrinkable, Medium Wall, Polyolefin Tubing
Table 1: Dimensions
Size
Minimum
Expanded
I.D. (D)
Maximum
Recovered
I.D. (d)
Nominal
Recovered
Jacket Wall
(W)
Nominal
Recovered
Adhesive Wall
(WI)
in. mm. in. mm. in. mm. in. mm.
10/3 .394 10 .118 3 .039 1.0 .010 .25
16/5 .630 16 .197 5 .055 1.4 .012 .30
25/8 .984 25 .315 8 .079 2.0 .014 .35
35/12 1.378 35 .472 12 .079 2.0 .014 .35
50/16 1.968 50 .630 16 .079 2.0 .014 .35
63/19 2.480 63 .748 19 .095 2.4 .016 .40
75/22 2.953 75 .866 22 .106 2.7 .016 .40
85/25 3.346 85 .984 25 .110 2.8 .016 .40
95/29 3.740 95 1.142 29 .122 3.1 .018 .45
115/34 4.527 115 1.339 34 .122 3.1 .018 .45
140/42 5.512 140 1.654 42 .122 3.1 .018 .45
160/50 6.300 160 1.968 50 .126 3.2 .020 .50
180/60 7.087 180 2.362 60 .126 3.2 .020 .50
Material: The tubing shall be fabricated from a modified irradiated polyolefin compounded to produce a
Homogeneous; uniform product whose outside surface is essentially free from flaws, defects, Pinholes,
seams, cracks, of inclusions. The interior is coated with a thermoplastic adhesive.
Color
: Black
Note:
Available as an option without adhesive.