1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
60
0.020"
0.51mm
typ.
0.150"
3.8 mm
min.
0.200" / 5.08 mm
0.075" / 1.91 mm dia. finished pins
0.070" /
1.78 mm
0.040" / 1.02 mm
0.240" /
6.10 mm
0.300" /
7.62 mm
0.040" /
1.02 mm
typ.
0.800"
20.32mm
1.085"/27.56mm
1.07"/27.18mm
TP Series
High Energy
Thick Film on Alumina Substrate
Substrate
Alumina
Resistor
Thick Film
Coating
Glass
Terminals
Solder Plated Phosphor Bronze
Thermal Conductivity
20 Watts/Meter/°C
Temperature Coefficient
1 to 100Ω: 100 ppm/°C
101Ω and up: 50 ppm/°C
Tolerance
±1%, ±5% and ±10%
Power Rating
Based on 25°C free air
Resistance Range
10 ohms to 1M ohm. Consult factory for other values
Maximum Operating Voltage
350 VAC, 500 VDC through glass
Energy Rating
100J: 100ms pulse with 100uF capacitor, not to exceed 1500 volts
Derating
100% @ 25°C to 0% @ 180°C ambient.
CHARACTERISTICS
FEATURES
• High-Temp Terminal
Construction
• Wide Resistance Range
• Low Inductance (50nH-
100nH)
• High Power Density
• Easy to install.
PC-mountable
V
t
E= Energy (joules)
t=Time (seconds)
V= Voltage (volts)
R= Resistance (ohms)
C= Capacitance (farads)
E = –CV
2
1
2
t = RC
Pulse
TP Series high energy resistors offer the user the
benefits of non-inductive performance and high
power density. As an added feature, they provide
the impulse energy capability normally associated
with wirewound or composition resistors. Double-
sided screen printing of pulse-tolerant thick film ink,
coupled with a sophisticated scan-cut laser trimming
process, maximize the energy withstanding capabili-
ties of the TP Series.
Standard part numbers for TP series
TP810PW10R0JE
TP810PW20R0JE
TP810PW50R0JE
TP810PW100RJE
TP810PW470RJE
TP810PW1K00JE
TP810PW4K70JE
TP810PW10K0JE
DIMENSIONS
(±.020 in. / ±.508mm)
ORDERING INFORMATION
Power Rating
10 = 10 watts
TP810PW4K50J E
Series
Tolerance
K = 10%
J = 5%
Package
PW = wraparound
terminal
Resistance Value (Ω)
10R0 = 10.0
2K00 = 2,000
45K0 = 45,000
Pin spacing
8 = 0.80"
RoHS
compliant
