WWW.LUNAINC.COM
Precision – Control – Results
Information in this technical datasheet is believed to
be correct and reliable. However, no responsibility is
assumed for possible inaccuracies or omission.
Specifications are subject to change without notice.
Page 1/2
© 2016 Luna Optoelectronics. All rights reserved.
Luna Optoelectronics, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935
DESCRIPTION FEATURES
This optocoupler, NSL-32SR3, consists of an LED input optically coupled
to a photocell. The photocell resistance is high when the LED current is
“off” and low resistance when the LED current is “on”.
• Compact, moisture resistant package
• Very low “on” resistance
• Low LED current
• Passive resistance output
RELIABILITY APPLICATIONS
This Luna high-reliability detector is in principle able to meet military test
requirements (Mil-STD-750, Mil-STD-883) after p
group test.
Contact Luna
for recommendations on specific test conditions and
procedures.
Industrial
ABSOLUTE MAXIMUM RATINGS
SYMBOL MIN MAX UNITS
(TA)= 23°C UNLESS OTHERWISE NOTED
Isolation Voltage - - 2000 V -
Operating Temperature -40 to +75 °C -
Storage Temperature -40 to +75 °C -
Soldering Temperature
2
- - +260 °C -
1. 2 mm from case for <5 sec.
2. Derate linearly to 0 at 75°C
3. The Rise Time, TR, is the time required for the dark to light change in conductance to reach 63% of its final value.
4. Measured after 1 minute ON @ IF =20mA followed by 10 sec. OFF.
5. Print “NSL-32SR3” and date code YYWW.
