AA3528SGS Datasheet AA3528SGS | P1-P3

SPEC NO: DSAL0871 REV NO: V.4B DATE: AUG/31/2012 PAGE: 1 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201006766

3.5x2.8mm SURFACE MOUNT LED LAMP

Part Number: AA3528SGS Super Bright Green

Features

z Single color.

z Suitable for all SMT assembly and solder process.

z Available on tape and reel.

z Ideal for backlighting.

z Package : 2000pcs / reel.

z Moisture sensitivity level : level 3.

z RoHS compliant.

Description

The Super Bright Green source color devices are made with

Gallium Phosphide Green Light Emitting Diode.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4.The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAL0871 REV NO: V.4B DATE: AUG/31/2012 PAGE: 2 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201006766

Handling Precautions

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic

significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.

As a result, special handling precautions need to be observed during assembly using silicone encapsulated

LED products. Failure to comply might lead to damage and premature failure of the LED.

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or

damage the internal circuitry.

4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.

4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.

4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup

and avoid damage during production.

5. As silicone encapsulation is permeable to gases, some corrosive substances such as H

S might corrode silver plating of

leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.

All design applications should refer to Kingbright application notes available at

http://www.KingbrightUSA.com/ApplicationNotes

SPEC NO: DSAL0871 REV NO: V.4B DATE: AUG/31/2012 PAGE: 3 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201006766

Selection Guide

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Note:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

Part No. Dice Lens Type

iewing

Angle [1]

Min. Typ. 2θ1/2

AA3528SGS Super Bright Green (GaP) Water Clear 12 25

120

Iv (mcd) [2]

@ 20mA

Symbol Parameter Device Typ. Max. Units Test Conditions

λpeak Peak Wavelength Super Bright Green 565 nm I

F=20mA

λD [1] Dominant Wavelength Super Bright Green 568 nm I

F=20mA

Δλ1/2 Spectral Line Half-width Super Bright Green 30 nm I

F=20mA

C Capacitance Super Bright Green 15 pF V

F=0V;f=1MHz

F [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA

R Reverse Current Super Bright Green 10 uA VR=5V

Parameter Super Bright Green Units

Power dissipation 62.5 mW

DC Forward Current 25 mA

Peak Forward Current [1] 140 mA

Reverse Voltage 5 V

Operating Temperature -40°C To +85°C

Storage Temperature -40°C To +85°C

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity/ luminous Flux: +/-15%.

3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.

Notes:

1.Wavelength: +/-1nm.

2. Forward Voltage: +/-0.1V.

3.Wavelength value is traceable to the CIE127-2007 compliant national standards.

P1-P3 P4-P6

AA3528SGS

Mfr. #:

Buy AA3528SGS

Manufacturer:

Kingbright

Description:

Standard LEDs - SMD Green Water Clear 568nm 25mcd

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

AA3528SGS