1217
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
AGASTAT
Catalog 1308242
Issued 3-03
SSF series
Programmable
Time Delay Relay
• 4 user-programmable timing modes
• 0.1 sec. to 10 hr. programmable timing range
• Parameters set with recessed screwdriver dials
• Universal voltage (plug-in relay dependent)
• 10A DPDT replaceable output relay minimizes downtime
• Front screw terminals
• DIN-rail, panel or machine tool track mount
File E15631
File LR29186
Timing Modes
Modes are user selectable via screwdriver adjustment of recessed 4-
position selector dial.
Modes offered are: On-Delay, Off-Delay, Interval and Latching Interval.
Timing Specifications
Timing Ranges: 0.1 to 3 / 0.33 to 10 / 1 to 30 / 4 to 120 sec.; 0.33 to 10 /
1 to 30 / 2 to 60 min.; 0.33 to 10 hr.
Timing Range Selection: Screwdriver select via recessed 8-position
selector dial.
Timing Adjustment: Recessed potentiometer adjustment with reference
calibrations.
Accuracy: Repeat Accuracy: ±1% ±0.01 sec.
Overall Accuracy: ±3% ±0.01 sec.
Reset Time: 30 ms.
Relay Operate Time: On-Delay and Interval mode: 30 ms.
Relay Release Time: Off-Delay, Interval and Latching Interval: 30 ms. (with
factory-installed relay).
Contact Data @ 25°C
Arrangements: 2 Form C (DPDT).
Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC 345VA.
Expected Mechanical Life: 10 million operations (with factory-installed
relay).
Expected Electrical Life: 500,000 operations, min., at rated resistive
load( with factory-installed relay).
Initial Dielectric Strength
Between Coil/Control Switch and Contacts: 1,500VAC for one minute.
Outline Dimensions
Wiring Diagram (Top View)
Mechanical Data
Mounting/Termination: Panel, DIN-rail, Machine Tool mounting track
mounting case with screw terminals.
Weight: 5.5 oz. (156g) approximately.
Environmental Data
Temperature Range: Storage: -40°C to +85°C.
Operating: -30°C to +65°C.
Input Data @ 25°C
Voltage: See Ordering Information section for details.
Power Requirement: 2W, max.
Transient Protection: Non-repetitive transients of the following magni-
tudes will not cause spurious operation of affect function and accuracy.
Operating Voltage <0.1 ms <1 ms
24, 48 VAC/VDC 1,000V 480V
120, 240VAC/VDC 3,000V 2500V*
* Min. source impedance of 100 ohm@120/240VAC, 3000V <0.1 , sec.
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
2.67
(68)
DIN
TRACK
MOUNT
2
3
1
7
8
10
4
5
6
1.095
(28)
2.19
(56)
0.188 (5) WIDE SLOT FOR #8 OR M4 MACHINE SCREW
0.342 (9)
3.125
(79)
0.343 (9)
HOLE
PATTERN
FOR
SCREW
MOUNT
6-32 CAPTIVE
CLAMP SCREWS
0.322
(8)
3.81
(97)
9
Ordering Information
SSF R 90 A
|| | |
Series SSF R = UL Operating Mode 90 Operating Voltage
Universal Recognized Multiple modes - (+10%, –15%)
Timer Component On-Delay A = 120VAC, 50/60 Hz.
Off-Delay B = 240VAC, 50/60 Hz.
Interval E = 24VAC, 50/60 Hz.
Latching Interval F = 48VAC, 50/60 Hz.
N = 48VDC
O =24VDC
P = 125VDC
X = No factory-
installed relay.†
† Voltage determined by customer-supplied relay. Only relays that operate
on the above-listed voltages should be used. Timer operation using
other relay voltages is not recommended.
Authorized distributors are likely to stock the following:
SSFR90A
SSFR90X
