https://www.phoenixcontact.com/us/products/1704194
09/22/2014Page2/5
Printed-circuit board connector-PT 2,5/ 5-PVH-5,0-1704194
Technical data
General
Rated surge voltage (II/2) 4 kV
Rated voltage (III/3) 250 V
Rated voltage (III/2) 320 V
Rated voltage (II/2) 630 V
Connection in acc. with standard EN-VDE
Nominal current I
N
13.5 A
Nominal cross section 2.5 mm²
Maximum load current 13.5 A
Insulating material PA
Inflammability class according to UL 94 V0
Internal cylindrical gage A3 / B3
Stripping length 8 mm
Number of positions 5
Screw thread M3
Tightening torque, min 0.45 Nm
Tightening torque max 0.5 Nm
Connection data
Conductor cross section solid min. 0.5 mm²
Conductor cross section solid max. 4 mm²
Conductor cross section stranded min. 0.5 mm²
Conductor cross section stranded max. 4 mm²
Conductor cross section stranded, with ferrule without plastic sleeve min. 0.5 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max. 2.5 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min. 0.5 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max. 2.5 mm²
Conductor cross section AWG/kcmil min. 20
Conductor cross section AWG/kcmil max 12
2 conductors with same cross section, solid min. 0.5 mm²
2 conductors with same cross section, solid max. 1.5 mm²
2 conductors with same cross section, stranded min. 0.5 mm²
2 conductors with same cross section, stranded max. 1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.5 mm² When using ferrules, 250 V are only achieved in combination with
surge voltage category/pollution degree II/2.
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
0.75 mm² When using ferrules, 250 V are only achieved in combination
with surge voltage category/pollution degree II/2.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, min.
0.5 mm² When using ferrules, 250 V are only achieved in combination with
surge voltage category/pollution degree II/2.
