Figure 17. Tape leader and trailer dimensions.
END START
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MINIMUM OF
230 mm
(9.05 INCH)
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. Obsoletes AV01-0520EN
AV02-0975EN - May 5, 2010
Convective IR Reow Soldering
For more information on IR reow soldering, refer to Application Note 1060, Surface Mounting SMT LED Indicator Components.
Storage Condition: 5 to 30°C @ 60% RH max.
Baking is required under the condition:
a) Humidity Indicator Card is >10% when read at 23 ± 5°C
b) Device exposed to factory conditions <30°C/60% RH more than 672 hours.
Baking recommended condition: 60 ± 5°C for 20 hours.
