1
Fuseholder Blocks & Clips
FMS (250V)
www.schurter.com /PG02
Fuses
Fuseholder Open Design, Holder for MSx 250, THT
250 V · 1.6 W / 6.3 A (VDE) /6.3 A (UL/CSA)
Description
- Through hole mounting
Standards
- UL 4248-1
- CSA C22.2 no. 4248.1
Approvals
- VDE Certificate Number: 40041146
- UL File Number: E39328
References
Fuseholder to MSF 250; MST 250; MSTU 250; MSU 250; MXT 250
Weblinks
pdf datasheet, html-datasheet, General Product Information, Packaging
details, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS,
REACH, Distributor-Stock-Check, Detailed request for product
Technical Data
Fuse-Link Microfuse 250 V
Mounting PCB
Terminal Solder THT
Rated Voltage 250 V (UL/CSA)
Rated current 6.3 A (VDE) / 6.3 A (UL/CSA)
Rated Power Acceptance IEC 1.6 W / 6.3 A @ Ta 23 °C
Admissible power acceptance at higher
ambient temperature see derating cur-
ves
Degree of Protection IP 30 with installed fuse
Admissible Ambient Air Temp. -40 °C to 85 °C
Climatic Category 40/085/21 acc. to IEC 60068-1
Material: Socket Thermoplastic, UL 94V-0
Material: Terminals Tin-Plated Copper Alloy
Unit Weight 0.37 g
Storage Conditions 0 °C to 60 °C, max. 70% r.h.
Product Marking , Type
Soldering Methods Wave
Soldering Profile
Solderability 245 °C / 3 sec acc. to IEC 60068-2-20,
Test Ta, method 1
Resistance to Soldering Heat 260 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 1A
Contact Resistance < 10 mΩ at 20 mV acc. to IEC 60127-6
Dielectric Strength > 2.5 kV between Life parts
(50 Hz; 1 min)
Insulation Resistance > 10 MΩ between Life parts
(500 VDC; 1 min)
Overvoltage Category III acc. to IEC 60664-1
Pollution Degree 2 acc. to IEC 60664-1
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in
General Product Information
Dimension
7.6 mm
3
4.3
5.08
ø 9.5
ø 0.5
8.5
3.2
4.4
45˚
R 0.75
ø 1.4
ø 1
Variant 0031.7601
1
5.08
Drilling diagram
