D/CRCW-IF e3
www.vishay.com
Vishay
Revision: 17-Mar-15
1
Document Number: 20024
For technical questions, contact: thickfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Pulse Proof Thick Film Chip Resistors
FEATURES
• High pulse performance, up to 10 kW
• Stability R/R 1 % for 1000 h at 70 °C
• AEC-Q200 qualified
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
Notes
• These resistors do not feature a limited lifetime when operated within the limits of rated dissipation, permissible operating voltage, and
permissible film temperature. However, the resistance typically increase due to the resistor’s film temperature over operating time, generally
known as drift. The drift may exceed the stability requirements of an individual application circuit and thereby limits the functional time.
• Marking: See data sheet “Surface Mount Resistor Marking” (document number 20020).
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
Note
(1)
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printe-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
STANDARD ELECTRICAL SPECIFICATIONS
TYPE
CASE
SIZE
IMPERIAL
CASE
SIZE
METRIC
POWER
RATING
P
70
W
LIMITING
ELEMENT
VOLTAGE
U
max.
AC
RMS
/DC
V
TEMPERATURE
COEFFICIENT
ppm/K
TOLERANCE
%
RESISTANCE
RANGE
SERIES
D10/CRCW0402-IF 0402 RR1005M 0.063 50 ± 200
± 5
1.0 to 100K E24
± 10
D11/CRCW0603-IF 0603 RR1608M 0.10 75 ± 200
± 5
1.0 to 100K E24
± 10
D12/CRCW0805-IF 0805 RR2012M 0.125 150 ± 200
± 5
1.0 to 100K E24
± 10
D25/CRCW1206-IF 1206 RR3216M 0.25 200 ± 200
± 5
1.0 to 100K E24
± 10
CRCW1210-IF 1210 RR3225M 0.50 200 ± 200
± 5
1.0 to 100K E24
± 10
CRCW2010-IF 2010 RR5025M 0.75 400 ± 200
± 5
1.0 to 100K E24
± 10
CRCW2512-IF 2512 RR6332M 1.0 500 ± 200
± 5
1.0 to 100K E24
± 10
TECHNICAL SPECIFICATIONS
PARAMETER UNIT
D10/
CRCW0402-IF
D11/
CRCW0603-IF
D12/
CRCW0805-IF
D25/
CRCW1206-IF
CRCW1210-IF CRCW2010-IF CRCW2512-IF
Rated dissipation
P
70
(1)
W 0.063 0.1 0.125 0.25 0.5 0.75 1.0
Operating voltage
U
max.
AC
RMS
/DC
V 50 75 150 200 200 400 500
Insulation voltage
U
ins
(1 min)
V 75 100 200 300 300 300 300
Insulation resistance
> 10
9
Operating temperature
range
°C -55 to +155
Failure rate h
-1
< 0.1 x 10
-9
Mass mg 0.65 2 5.5 10 16 25.5 40.5
