MP20075 – 3A, 1.05V-3.6V INPUT, DDR2/3/3L MEMORY TERMINATION REGUALTOR
MP20075 Rev. 1.2 www.MonolithicPower.com 2
7/15/2013 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2013 MPS. All Rights Reserved.
ORDERING INFORMATION
Part Number* Package Top Marking Free Air Temperature (T
A
)
MP20075DH
MSOP8E
20075
-40°C to +85°C
* For Tape & Reel, add suffix –Z (e.g. MP20075DH–Z);
For RoHS Compliant Packaging, add suffix –LF (e.g. MP20075DH–LF–Z)
PACKAGE REFERENCE
DDQ
VTT
GND
VTTSEN
1
2
3
4
8
7
6
5
VTTREF
EN
REF
VDRV
TOP VIEW
EXPOSED PAD
ON BACKSIDE
ABSOLUTE MAXIMUM RATINGS
(1)
Supply Voltage V
DDQ
........................ -0.3V to 3.6V
Drive Voltage VDRV..................... -0.3V to 6.0V
All Other Pins................................ -0.3V to 6.0V
Continuous Power Dissipation (T
A
= +25°C)
(2)
........................................................... 1.56W
Junction Temperature...............................150
o
C
Lead Temperature ....................................260
o
C
Storage Temperature .............. -50
o
C to +150
o
C
Recommended Operating Conditions
(3)
Drive Voltage VDRV.................... 3.0V to 3.5V
Operating Junct. Temp (T
J
) .......-40
o
C to +125
o
C
Thermal Resistance
(4)
θ
JA
θ
JC
MSOP8E.................................. 50...... 12...
o
C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature T
J
(MAX), the junction-to-
ambient thermal resistance θ
JA
, and the ambient temperature
T
A
. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by P
D
(MAX)=(T
J
(MAX)-
T
A
)/ θ
JA
. Exceeding the maximum allowable power dissipation
will cause excessive die temperature, and the regulator will go
into thermal shutdown. Internal thermal shutdown circuitry
protects the device from permanent damage.
3) The device is not guaranteed to function outside of its operating
conditions.
4) Measured on JESD51-7 4-layer board.