AMMP-5024-TR2G Datasheet AMMP-5024-TR2G, AMMP-5024-TR1G, AMMP-5024-BLKG | P1-P3

AMMP-5024

30kHz – 40 GHz Traveling Wave Amplier

Data Sheet

Description

Avago Technologies’ AMMP-5024 is a broadband PHEMT

GaAs MMIC TWA designed for medium output power

and high gain over the full 30 KHz to 40 GHz frequency

range. The design employs a 9-stage, cascade-connected

FET structure to ensure at gain and power as well

as uniform group delay. E-beam lithography is used

to produce uniform gate lengths of 0.15um and MBE

technology assures precise semiconductor layer control.

Features

• Surface Mount Package 5.0 x 5.0 x 2.0 mm

• Wide Frequency Range 30kHz – 40GHz

• High Gain: 14.8 dB Typical @ 22GHz

• Output P1dB: 22 dBm Typical @ 22GHz

• 50 Ohm Input and Output Match

Applications

[1]

• Broadband Test and Measurement Applications

Pin Function

1 V

aux

2 Not Used

3 Not Used

4 RF

out

/ Vd

5 V

6 Not Used

7 V

8 RF

1 2 3

7 56

8RFin

RFout/Vd

NCVaux

NCVg2

Vg1

Attention: Observe precautions for

handling electrostatic sensitive devices.

ESD Machine Model (Class A): 40V

ESD Human Body Model (Class 0): 150V

Refer to Avago Application Note A004R:

Electrostatic Discharge Damage and Control.

Note: MSL Rating = Level 2A

Functional Block DiagramPackage Diagram

1 2 3

7 56

Electrical Specications

1. All tested parameters guaranteed with measurement accuracy ± 0.5 dB for gain.

Table 1. RF Electrical Characteristics (Freq=22GHz, Vd= 7.0V, Idq=200mA, TA= 25°C, Zin=Zo=50Ω)

Parameter Min Typ. Max Unit

Small-signal Gain, Gain 12.5 14.8 16.5 dB

Noise Figure, NF 4.6 dB

Output Power at 1dB Gain Compression, P1dB 22 dBm

Third Order Intercept Point;

∆f=100MHz; Pin=-5dBm, OIP3

25 dBm

Input Return Loss, RLin 13 dB

Output Return Loss, RLout 14 dB

Reverse Isolation, Isolation 30 dB

Table 2. RF Electrical Characteristics (Freq=22GHz, Vd= 4.0V, Idq=160mA, TA= 25°C, Zin=Zo=50Ω)

Parameter Min Typ. Max Unit

Small-signal Gain, Gain 15 dB

Noise Figure, NF 4.6 dB

Output Power at 1dB Gain Compression, P1dB 19 dBm

Third Order Intercept Point;

∆f=100MHz; Pin=-5dBm, OIP3

18.5 dBm

Input Return Loss, RLin 13 dB

Output Return Loss, RLout 14 dB

Reverse Isolation, Isolation 27 dB

Table 3. Recommended Operating Range

(Vd=7V, Vg2=open, Ta= 25°C, otherwise specied)

Description

Specications

Unit CommentsMin. Typical Max.

Drain Supply Voltage, Vd 7 V

Total Drain Supply Current, Id 200 mA Vg1 set for typical Id

First Gate Voltage, Vg1 -3.5 -3.0 -2.5 V Vd=7V, Id=200mA

Saturated Drain Current, Idss 350 mA Vg1=0V

First Gate Minimum Drain Current, Idsmin (Vg1) 80 mA Vg1=-7V

Table 4. Thermal Properties

Parameter Test Conditions Value

Thermal Resistance, θjc θjc = 16.2 °C/W

Note:

1. Channel-to-board Thermal Resistance is measured using QFI method.

Absolute Minimum and Maximum Ratings

Table 5. Minimum and Maximum Ratings

Description

Specications

Min. Max. Unit Comments

Drain Supply Voltage, Vd 10 V

Drain Current, Id 380 mA

First Gate Voltage, Vg1 -9.5 0 V

First Gate Current, Ig1 -38 1 mA

Second Gate Voltage, Vg2 -3.5 4 V

Second Gate Current, Ig2 -20 mA

RF Input Power, Pin 17 dBm CW

Channel Temperature, Tch +150 °C

Storage Temperature, Tstg -65 +150 °C

Maximum Assembly Temperature, Tmax +260 °C 20 second Maximum

Notes:

1. Operation in excess of any one of these conditions may result in permanent damage to this device. The absolute maximum ratings for DC and

Power parameters were determined at an ambient temperature of 25°C unless noted otherwise.

P1-P3 P4-P6 P7-P8

AMMP-5024-TR2G

Mfr. #:

Buy AMMP-5024-TR2G

Manufacturer:

Broadcom / Avago

Description:

RF Amplifier 100MHz-40GHz

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

AMMP-5024-TR2G

AMMP-5024-TR2G

Products related to this Datasheet