OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue A 04/06
Page 2 of 4
4-Pin Green LED Lamp
OVFSG6C8
Storage Temperature Range -40 ~ +100° C
Operating Temperature Range -40 ~ +100° C
Lead Soldering Temperature (3 mm from the base of the epoxy bulb)
1
260° C
Reverse Voltage 5 V
Continuous Forward Current
2
30 mA
Peak Forward Current (10% Duty Cycle, PW VHF 100 mA
Power Dissipation 140 mW
Absolute Maximum Ratings
T
A
= 25
o
C unless otherwise noted
Notes:
1. Solder time less than 3 seconds at temperature extreme.
Electrical Characteristics
T
A
= 25
o
C unless otherwise noted
SYMBOL
PARAMETER MIN TYP MAX UNITS CONDITIONS
lumen Luminous Flux 1500 2500 ---- mlm I
F
= 30 mA
V
F
Forward Voltage ---- 4.0 4.6 V I
F
= 30 mA
I
R
Reverse Current ---- ---- 100 µA V
R
= 5 V
D
Dominant Wavelength 515 527 535 nm I
F
= 30 mA
2 ½ 50% Power Angle ---- 60 ---- deg I
F
= 30 mA
Rank V9 V10 V11 V12 V13
Voltage (V) 3.2–3.4 3.4–3.6 3.6–3.8 3.8–4.0 4.0–4.2
V14
4.2–4.4
V15
4.4–4.6
Forward Voltage (V
F
)
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
Standard Bins (I
F
= 30 mA)
Lamps are sorted to luminous flux (
V
), forward voltage (V
F
), and dominant wavelength (
D
) bins shown.
Orders for OVFSG6C8 may be filled with any or all bins contained as below.
Luminous flux is at
F bin or above.
515
Dominant Wavelength (nm)
Luminous Flux (mlm)
520 525 530 535
2500-3600
H
2000-3000
G
1500-2400
F
X6 X7 X8 X9
