FLHTC0312-24-9 Datasheet FLHTC0312-18-6-1KF, FLHTC0312-18-3-1KF, FLHTC0312-22-0 | P1-P2

Users should evaluate the suitability of this product for their application. Specications are subject to change without notice.

Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specication, without notication to Buyer.

1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE

ADDED TO THE PART NUMBER. AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.

Page 1 of 2

The TE logo, Tyco Electronics and Raychem are trademarks.

Raychem Wire & Cable

501 Oakside Avenue

Redwood City, CA 94063-3800

Phone: 1-800-227-8816

Fax: 1-650-361-6297

DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL

THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.

REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.

SPECIFICATION CONTROL DRAWING

FLHT+0312

HIGH TEMPERATURE HOOKUP WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED, 600 VOLT 8-18-10 G

The complete requirements for procuring the wire described herein shall consist of this document and the issue in effect of

Raychem Specication WCD 3106, UL Subject 758, Style 3557, File E303150 and carries UL labels to this effect.

TITLE

Date Revision

TABLE I. CONSTRUCTION DETAILS

PART NUMBER

WIRE

SIZE

(AWG)

CONDUCTOR

STRANDING

(number x AWG)

NOMINAL

CONDUCTOR

DIAMETER

(in.) (mm)

FINISHED WIRE

MAXIMUM

RESISTANCE

AT 20°C

(ohms/1000 ft.)

(ohms/km)

DIAMETER

(in.) (mm)

NOMINAL

WEIGHT

(lbs/1000 ft.)

(kg/km)

MINIMUM NOMINAL MAXIMUM

FLHTB0312-28-* 28 7 x 36 .015 (.381) 68.2 (224.) .0271 (.688) .0285 (.724) .0299 (.759) .89 (1.32)

FLHTC0312-26-* 26 19 x 38 .019 (.483) 42.7 (140.) .0301 (.765) .0315 (.800) .0329 (.836) 1.29 (1.92)

FLHTC0312-24-* 24 19 x 36 .024 (.610) 26.7 (87.6) .0351 (.892) .0365 (.927) .0379 (.963) 1.88 (2.80)

FLHTC0312-22-* 22 19 x 34 .030 (.762) 16.9 (55.4) .0411 (1.04) .0425 (1.08) .0439 (1.12) 2.75 (4.09)

FLHTC0312-20-* 20 19 x 32 .038 (.965) 10.6 (34.8) .0491 (1.25) .0505 (1.28) .0519 (1.32) 4.25 (6.32)

FLHTC0312-18-* 18 19 x 30 .047 (1.19) 6.66 (21.9) .0583 (1.48) .0600 (1.52) .0617 (1.57) 6.44 (9.58)

FLHTC0312-16-* 16 19 x 29 .053 (1.35) 4.82 (15.8)

.0656 (1.67) .0675 (1.71) .0694 (1.76) 8.21 (12.2)

FLHTC0312-14-* 14 19 x 27 .066 (1.68) 3.05 (10.0) .0799 (2.03) .0820 (2.08) .0841 (2.14) 12.7 (18.8)

FLHTD0312-14-* 14 37 x 30 .067 (1.71) 3.22 (10.6) .0812 (2.06) .0833 (2.12) .0854 (2.17) 12.0 (17.9)

FLHTD0312-12-* 12 37 x 28 .085 (2.16) 2.01 (6.59) .0984 (2.50) .1010 (2.57) .1036 (2.63) 19.3 (28.7)

CONDUCTOR - SILVER-COATED COPPER

INSULATION - RADIATION-CROSSLINKED,

MODIFIED ETFE

SPECIFICATION CONTROL DRAWING

2 of 2 G

FLHT+0312

Page

Revision

SCD

WIRE RATINGS AND ADDITIONAL REQUIREMENTS

TEMPERATURE RATING: 200°C

VOLTAGE RATING: 600 volts (rms) at sea level

CROSSLINK VERIFICATION: 300 ± 3°C for 1 hour

FLAME RATING: VW-1

INSULATION ELONGATION AND TENSILE STRENGTH:

Elongation, 100% (minimum)

Tensile Strength, 5470 lbf/in

(minimum)

INSULATION FLAWS:

Spark Test, 6.0 kV (rms)

Impulse Dielectric Test, 8.0 kV (peak)

INSULATION THICKNESS:

AWG 28 - 16: .0055 inch (minimum), .006 inch (minimum average)

AWG 14: .006 inch (minimum), .0065 inch (minimum average)

AWG 12: .0065 inch (minimum), .007 inch (minimum average)

1/ See footer section on page 1

SHRINKAGE: 200°C for 1 hour, 0.125 in. (maximum) per end

THERMAL STABILITY: 232°C for 168 hours,

Elongation, 60% (minimum)

Tensile Strength, 5000 lbf/in

(minimum)

VOLTAGE WITHSTAND (Post Environmental): 2500 volts (rms), 60 Hz, 5 minutes

PART NUMBER:

The “+” in the part number in the upper right hand corner of pages 1 and 2 shall be replaced with

a letter designator to dene conductor stranding (see part numbers in table).

B = 7 Strands C = 19 Strands D = 37 Strands

The “*” in the part numbers in tables I and II shall be replaced by a color code designator.

1/ Example: AWG 18, 19 strands, white: FLHTC0312-18-9

AWG 18, 19 strands, white with black stripe: FLHTC0312-18-90

TABLE II. PERFORMANCE DETAILS

PART NUMBER

BEND TESTING

MANDREL DIAMETER

(inch) (mm) (± 3%)

WEIGHT

(lb) (kg) (± 3%)

CROSSLINK VERIFICATION CROSSLINK VERIFICATION

FLHTB0312-28-* .375 (9.53) .125 (.057)

FLHTC0312-26-* .375 (9.53) .125 (.057)

FLHTC0312-24-* .375 (9.53) .500 (.227)

FLHTC0312-22-* .500 (12.7) .750 (.340)

FLHTC0312-20-* .500 (12.7) 1.00 (.454)

FLHTC0312-18-* .500 (12.7) 1.00 (.454)

FLHTC0312-16-* .750 (19.1) 1.50 (.680)

FLHTC0312-14-* 1.00 (25.4) 2.00 (.907)

FLHTD0312-14-* 1.00 (25.4) 2.00 (.907)

FLHTD0312-12-* 1.50 (38.1) 3.00 (1.36)

P1-P2

FLHTC0312-24-9

Mfr. #:

Buy FLHTC0312-24-9

Manufacturer:

TE Connectivity

Description:

Hook-up Wire FLHTC0312-24-9

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

FLHTC0312-24-9

FLHTC0312-24-9

Products related to this Datasheet