Switchmode/High Frequency
Toroidal Inductor
Web: www.TriadMagnetics.com
Phone 951-277-0757
Fax 951-277-2757
460 Harley Knox Blvd.
Perris, California 92571
Publish Date: June 7, 2016
LEADS TINNED TO
D
A
B
E
C
F
G (DIA.)
MTG SURFACE MIN.
FIT68-6
Description:
The FIT68-6 toroidal inductor is specifically designed to minimize transients.
It stores energy and therefore, conditions the output signal by leveling the current
waveform providing a more stable current supply. Generally used in high frequency
circuits, its standard design provides an economical solution in differential mode
applications or as an output inductor.
Electrical Specifications (@25C):
Min. Inductance (µH) Rated
DC Amps
Max
DCR (mΩ)
No Bias At Bias
24.31 13.56 6.8 20.2
Note: No Bias inductance measured at .25V, 10KHZ.
Dimensions:
A B C D E F G
.875 .475 .950 .300 .474 .125 .036±.003
Units: In inches
Weight:
.026 lbs.
Technical Notes:
1. Nominal inductance values are typically 10% higher than minimal rating.
2. Biased inductance measured at rated DC amps.
3. Operation at rated current yields approximately 40°C temperature rise
over 20°C ambient.
RoHS Compliance: As of manufacturing date February 2005, all standard products meet
the requirements of 2011/65/EU, known as the RoHS initiative.
*Upon printing, this document is considered “uncontrolled”. Please contact Triad Magnetics
website for the most current version. For soldering and washing information please see
http://www.triadmagnetics.com/faq.html
