HMC363S8GTR

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
3
HMC363S8G / 363S3GE
v05.0412
SMT GaAs HBT MMIC
DIVIDE-BY-8, DC - 12 GHz
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
Absolute Maximum Ratings
Typical Supply Current vs. Vcc
Note: Divider will operate over full voltage range shown above
Vcc (V) Icc (mA)
4.75 64
5.0 70
5.25 75
RF Input (Vcc = +5V) +13 dBm
Vcc +5.5V
Channel Temperature 135 °C
Continuous Pdiss (T=85°C)
(derate 13.7 mW/°C above 85°C)
680 mW
Thermal Resistance
(channel to ground paddle)
73.2 C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
-300
-200
-100
0
100
200
300
22.7 23.1 23.5 23.9 24.3 24.7
AMPLITUDE (mV)
TIME (nS)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
4
HMC363S8G / 363S3GE
v05.0412
SMT GaAs HBT MMIC
DIVIDE-BY-8, DC - 12 GHz
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[3]
HMC363S8G Low Stress Injection Molded Plastic Sn/Pb Solder
MSL1
[1]
HMC363
XXXX
HMC363S8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
MSL1
[2]
HMC363
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
5
HMC363S8G / 363S3GE
v05.0412
SMT GaAs HBT MMIC
DIVIDE-BY-8, DC - 12 GHz
Application Circuit
Pin Description
Pin Number Function Description Interface Schematic
1 NOUT Divided output 180° out of phase with pin 3.
2, 6 N/C No connection. These pins must not be grounded.
3 OUT Divided Output.
4 VCC Supply voltage 5V ± 0.25V.
5 IN RF Input must be DC blocked.
7 NIN
RF Input 180° out of phase with pin 5 for differential operation.
A/C ground for single ended operation
8, paddle GND
Backside of package has exposed metal ground slug which
must be connected to ground.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D

HMC363S8GTR

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
Prescaler InGaP HBT Divide-by-8 SMT, DC - 12 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union