Spec.No.JENF243A-9127C-01 P2/8
MURATA MFG.CO.,LTD.
Reference Onl
5.Marking
No marking.
6.Specifications
6-1.Electrical Performance
No. Item Specification Test Method
6-1-1 Impedance Meet item 3. Measuring Frequency : 100MHz±1MHz,1GHz±1MHz
Measuring Equipment : KEYSIGHT4291A or the
equivalent
Test Fixture : KEYSIGHT16192A or the equivalent
6-1-2 DC Resistance Meet item 3. Measuring Equipment : Digital multi meter
*Except resistance of the Substrate and Wire
6-2.Mechanical Performance (based on Table 13 for FILTER EMI SUPPRESSORS/FILTERS)
AEC-Q200 Rev.D issued June. 1 2010
AEC-Q200
Murata Specification / Deviation
No. Stress Test Method
3 High
Temperature
Exposure
1000hours at 125 deg C
Set for 24hours
at room temperature,
then measured.
Meet Table A after testing.
Table A
4 Temperature Cycling 1000cycles
-55 deg C to +125 deg C
Set for 24hours
at room temperature,
then measured.
Meet Table A after testing.
5 Destructive
Physical Analysis
Per EIA469
No electrical tests
No defects
7
Biased Humidity 1000hours at 85 deg C, 85%RH
Apply max rated current.
Meet Table A after testing.
8 Operational Life Apply 125 deg C 1000hours
Set for 24hours at
room temperature,
then measured
Meet Table A after testing.
9
External Visual Visual inspection No abnormalities
10 Physical Dimension Meet ITEM 4
(Style and Dimensions)
No defects
12 Resistance
to Solvents
Per MIL-STD-202 Method 215 Not Applicable
13 Mechanical Shock
Per MIL-STD-202 Method 213
Condition F:
1500g's(14.7N)/0.5ms/Half sine
Meet Table A after testing.
14 Vibration 5g's(0.049N) for 20 minutes
12cycles each of 3 oritentations
Test from 10-2000Hz.
Meet Table A after testing.
15 Resistance
to Soldering Heat
Solder temperature
260C+/-5 deg C
Immersion time 10s
Pre-heating: 150C +/-10 deg C, 60s to 90s
Meet Table A after testing.
Appearance No damage
Impedance
Change
(at 100MHz)
Within ±30%
DC
Resistance
Meet item 3.