MCS0402HZ0000ZE100

Document Number: 28744 For technical questions, contact: specialresistors@vishay.com
www.vishay.com
Revision: 11-Jun-12 367
MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01, MCA 1206 VG01
Thin Film Chip Resistors with Established Reliability
Vishay Beyschlag
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FUNCTIONAL PERFORMANCE
Further information on the performance of these products is
given in the following datasheets:
“Professional Flat Chip Resistors”, document no. 28705
“Precision Flat Chip Resistors”, document no. 28700
TESTS AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
EN 60115-1, generic specification
EN 140400, sectional specification
EN 140401-801, detail specification
For further information on the tests and requirements of
these products please refer to the specifications mentioned
above, and to the following datasheets:
“Professional Flat Chip Resistors”
(www.vishay.com/doc?28705
)
“Precision Flat Chip Resistors”
(www.vishay.com/doc?28700)
HISTORICAL 12NC INFORMATION
The resistors had a 12-digit code starting with 2312
The subsequent 4 digits indicated the resistor type,
specification and packaging; see the 12NC table
The remaining 4 digits indicate the resistance value:
- The first 3 digits indicated the resistance value
- The last digit indicated the resistance decade in
accordance with the resistance decade table
RESISTANCE DECADE
Historical 12NC Example
The 12NC of a MCT 0603 VG01 resistor, value 287K and
TCR 50 with ± 1 % tolerance, supplied in cardboard tape of
5000 units per reel was: 2312 215 02874.
RESISTANCE DECADE LAST DIGIT
1 to 9.99 8
10 to 99.9 9
100 to 999 1
1 k to 9.99 k 2
10 k to 99.9 k 3
100 k to 999 k 4
1M 5
HISTORICAL 12NC - Resistor type and packaging
DESCRIPTION
2312 ... .....
CARDBOARD TAPE ON REEL
TYPE TCR TOL.
E1
1000 PIECES
E0
10 000 PIECES
MCS 0402 VG01
± 50 ppm/K ± 1 % 260 0.... 275 0....
± 15 ppm/K ± 0.1 % 262 0.... 277 0....
Jumper 262 90001 277 90001
TYPE TCR TOL.
P1
1000 PIECES
P5
5000 PIECES
PW
20 000 PIECES
MCT 0603 VG01
± 50 ppm/K ± 1 % 200 0.... 215 0.... 205 0....
± 15 ppm/K ± 0.1 % 202 0.... 217 0.... -
Jumper 202 90001 217 90001 207 90001
MCU 0805 VG01
± 50 ppm/K ±1 % 240 0.... 255 0.... 245 0....
± 15 ppm/K ± 0.1 % 242 0.... 257 0.... -
Jumper 242 90001 257 90001 247 90001
MCA 1206 VG01
± 50 ppm/K ± 1 %
No 12NC assigned to MCA 1206 VG01± 15 ppm/K ± 0.1 %
Jumper
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

MCS0402HZ0000ZE100

Mfr. #:
Manufacturer:
Description:
Thin Film Resistors - SMD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union