OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HFBR-1505AZ

P1-P3P4-P6P7-P9P10-P10
ST
®
is a registered trademark of AT&T.
HCS
®
is a registered trademark of OFS Corporation.
HFBR-1505AZ/2505AZ (SMA Tx/Rx for SERCOS)
HFBR-1515BZ/2515BZ (ST
®
Tx/Rx for PROFIBUS)
HFBR-1505CZ/2505CZ (SMA Tx/Rx for INTERBUS-S)
Fiber Optic Transmitters and Receivers
for SERCOS, PROFIBUS and INTERBUS-S Applications
Data Sheet
Features
Meets industrial SERCOS, PROFIBUS, and INTERBUS-S
standard
SMA and ST
®
ports
650 nm wavelength technology
Speci ed for use with 1 mm plastic optical  ber and
200 μm hard clad silica
Auto-insertable and wave solderable
DC – 10 MBd data rate
RoHS-compliant
Applications
Industrial control data links
Factory automation data links
Voltage isolation applications
PLCs
Motor drives
Sensor, meter and actuator interfaces
Description
SERCOS
SERCOS, an acronym for SErial Realtime COmmunications
System, is a standard digital interface for communication
in industrial CNC applications. SERCOS is a European (EN
61491) and international standard (IEC 61491). The optical
interface allows data rates of 2, 4, 8, and 16 MBd and data
transfer between numerical controls and drives via  ber-
optic rings, with voltage isolation and noise immunity.
The HFBR-1505AZ and HFBR-2505AZ products comply
with SERCOS speci cations for optical characteristics and
connector style, and have guaranteed performance up
to 10 MBd. (Typically the 16 MBd required by SERCOS
is possible as well but please contact Avago regarding
the plan for the 16 MBd device.)
PROFIBUS
PROFIBUS, an acronym of PROcess FIeld BUS, is an open
eldbus standard de ned for data rates ranging from
9.6 kBd to 12 MBd in selectable steps for wire and
optical  ber. PROFIBUS is a German national DIN 19245
standard and a European CENELEC standard EN 50170.
The ST
®
connector is the recommended optical port of
the PROFIBUS optical  ber version but other connectors
are allowed as well. The HFBR-1515BZ and HFBR-2515BZ
comply fully to the technical guideline using Plastic
Optical Fiber up to 6 MBd, and have a guaranteed
performance at data rates up to 10 MBd. (Typically the
12 MBd is possible as well, but please contact Avago
regarding the plan for the 12 MBd device.)
INTERBUS-S
INTERBUS-S, a special open Sensor/Actuator Bus, is
nding a broad acceptance in the factory automation
industry. The HFBR-1505CZ and HFBR-2505CZ were
specially designed for this application and can be used
with 1 mm POF and 200 μm HCS  ber at the speci ed
data rates of 500 kBd and 2 MBd. The optical transmis-
sion guideline is a supplement of the German National
DIN E 19258 standard draft. On the European level, prEN
50254 is the draft of the INTERBUS-S  eldbus.
2
Speci ed Link Performance
-0C to +70C unless otherwise noted.
Parameter Symbol Min. Max. Unit Condition Reference
Link Distance with 1 0.1 40 m POF Notes 1, 2, 3, 4, 6
HFBR-1505AZ/2505AZ or 0.1 200 m HCS
®
Notes 1, 2, 3, 5, 6
HFBR-1515BZ/2515BZ
Link Distance with 1 0.1 50 m POF Notes 1, 2, 3, 4, 7
HFBR-1505CZ/2505CZ 0.1 400 m HCS
®
Notes 1, 2, 3, 5, 7
Pulse Width Distortion PWD –30 +30 ns 25% to 75% Note 1
with HFBR-1505AZ/2505AZ duty cycle
or HFBR-1515BZ/2515BZ
Pulse Width Distortion PWD –125 +125 ns arbitrary duty cycle Note 1
with HFBR-1505CZ/2505CZ
Notes:
1. With recommended Tx and Rx circuits (60 mA nominal drive current).
2. POF HFBR-ExxyyyZ 0.23 dB/m worst case attentuation.
3. HCS
®
10 dB/km worst case attenuation.
4. Including a 3 dB optical safety margin accounting for link service lifetime.
5. Including a 2 dB optical safety margin accounting for link service lifetime.
6. Signaling rate DC to 10 MBd.
7. Signaling rate DC to 2 MBd.
CAUTION: The small junction size inherent in the design of these components increases the components’ susceptibility
to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and
assembly of these components to prevent damage and/or degradation which may be induced by ESD.
Recommended Chemicals for Cleaning/Degreasing
X5X5X Products
Alcohols: methyl, isopropyl, isobutyl.
Aliphatics: hexane, heptane.
Other: soap solution, naphtha.
Do not use partially halogenated hydrocarbons such as
1,1,1 trichloroethane, ketones such as MEK, acetone,
chloroform, ethyl acetate, methylene dichloride, phenol,
methylene chloride or N-methylpyrolldone. Also, Avago
does not recommend the use of cleaners that use
halogenated hydrocarbons because of their potential
environmental harm.
Package Information
All HFBR-X5X5XZ series transmitters and receivers are
housed in a low-cost, dual-in-line package that is made
of high strength, heat resistant, chemically resistant and
UL 94 V-O (UL  le # E121562)  ame retardant plastic.
The transmitters are easily identi ed by the light grey
colored connector port. The receivers are easily identi ed
by the dark grey colored connector port. The package
is designed for auto-insertion and wave soldering so it
is ideal for high volume production applications.
Handling and Design Information
When soldering, it is advisable to leave the protective
cap on the unit to keep the optics clean. Good system
performance requires clean port optics and cable ferrules
to avoid obstructing the optical path. Clean compressed
air often is su cient to remove particles of dirt; methanol
on a cotton swab also works well.
3
HFBR-15X5XZ Transmitters
The HFBR-15X5XZ transmitter incorporates a 650 nm
LED in a light gray nonconductive plastic housing.
The high light output power enables the use of both
plastic optical  ber (POF) and Hard Clad Silica (HCS
®
).
This transmitter can be operated up to 10 MBd using
a simple driver circuit. The HFBR-1505XZ is compatible
with SMA connectors, while the HFBR-1515XZ mates
with ST
®
connectors.
EYE SAFETY: The HFBR-15x5XZ is a Class 1 LED Product and eye safe when used within the data sheet limits and
under normal operating conditions. This includes all reasonably foreseeable single fault conditions per IEC60825-1
and amendments.
Electrical/Optical Characteristics
-0C to +70C unless otherwise noted.
Parameter Symbol Min. Typ.
[1]
Max. Unit Condition Ref.
Optical Power Temperature P
T
/T –0.02 dB/˚C
Coe cient
Forward Voltage V
F
1.8 2.1 2.65 V I
F, dc
= 60 mA Fig. 1
Forward Voltage V
F
/T –1.8 mV/˚C Fig. 1
Temperature Coe cient
Breakdown Voltage V
BR
3.0 13 V I
F, dc
= –10 μA
Peak Emission Wavelength
PK
640 650 660 nm Fig. 3
Full Width Half Max FWHM 21 30 nm Fig. 3
Diode Capacitance C
O
60 pF V
F
= 0 V, f = 1 MHz
Thermal Resistance
JC
140 ˚C/W Notes 4, 5
Rise Time (10% to 90%) t
r
13 ns 10% to 90%,
Fall Time (90% to 10%) t
f
10 ns
I
F
= 60 mA
Absolute Maximum Ratings
Parameter Symbol Min. Max. Unit Reference
Storage and Operating Temperature T
S,O
–40 85 °C
Peak Forward Input Current I
F,PK
90 mA Note 6
Average Forward Input Current I
F, AV G
60 mA
Reverse Input Voltage V
R
3 V
Lead Soldering Cycle Temp T
SOL
260 °C Note 7, 12
Time 10 s
PIN FUNCTION
1
4
5
6
7
8
CONNECTED TO PIN 4
CONNECTED TO PIN 1
GND
GND
CATHODE
ANODE
5
6
7
8
4
1
BOTTOM VIEW,
HFBR-15x5xZ
SEE NOTE 10
P1-P3P4-P6P7-P9P10-P10

HFBR-1505AZ

Mfr. #:
Buy HFBR-1505AZ
Manufacturer:
Broadcom / Avago
Description:
Fiber Optic Transmitters, Receivers, Transceivers SERCOS 4 MBd SMA Tx RoHS
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet