Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
R.Cap. code
R. Voltage code
Lot. No.
Polarity
marking(+)
L
W
S
W1
H
S
Surface Mount Type
Series : TV
●
Guaranteed at 85 °C 85 %RH
●
Guaranteed at 125 °C
●
RoHS compliance, Halogen free
Speci cations
Features
Characteristics list
Size code D2E D3L
Category temperature range
–55 °C to +125 °C
Rated voltage range 6.3 V.DC to 10 V.DC 10 V.DC
Category voltage range 4.0 V.DC to 6.3 V.DC 6.3 V.DC
Rated capacitance range 68 µF to 150 µF 150 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current
Please see the attached characteristics list
Dissipation factor (tan
d
) Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+125 °C, 1000 h, category voltage applied (+105 °C 2000 h, rated voltage applied)
temp.
125 °C 105 °C
Capacitance change
Within ±20 % of the initial value Within ±20 % of the initial value
tan
d
< 2 times of the initial limit < 1.5 times of the initial limit
Damp heat
(Steady State)
DC leakage current
< 2 times of the initial limit
Within the initial limit
+85 °C, 85 % to 90 %, 500 h, rated voltage applied
Capacitance change
Within +40 %, −20 % of the initial value
tan
d
< 1.5 times of the initial limit
DC leakage current Within the initial limit
Size code
L±0.3
W±0.2
✽1
H±0.2 S±0.2 W1±0.1
D2E 7.3 4.3 1.8 1.3 2.4
D3L 7.3 4.3 2.8 1.3 2.4
R. Voltage (V.DC)
6.3 10.0
Code jA
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
✽1
current
(mAr.m.s.)
ESR
✽2
(mΩ max.)
tan d
✽3
LC
✽4
(µA)
Part number
Min.
Packaging Q'ty
(pcs)
TV
6.3 105 4.0 125 150 7.3 4.3 1.8
D2E
2400 25 0.10 94.5 6TVE150M 3000
10
105 6.3 125 68 7.3 4.3 1.8 2400 25 0.10 68.0 10TVE68M 3000
105 6.3 125 150 7.3 4.3 2.8 D3L 2400 25 0.10 150.0 10TVE150ML 2500
✽
1 Ripple current (100 kHz/ +45 °C ),
✽
2 ESR (100 kHz/+20 °C)
✽
3 tan
d
(120 Hz/+20 °C)
✽
4 After 5 minutes
◆
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Unit : mm
✽
1 ±0.1 : D2E
✽
Externals of fi gure are the reference.
Marking Dimensions (not to scale)
Nov. 201501
