HCPL-7560-500 Datasheet HCPL-7560-500E, HCPL-7560-360, HCPL-7560-560 | P1-P3

Description

The HCPL-7560 Optically Isolated Modulator and HCPL-

0872 Digital Interface IC or digital lter together form

an isolated programmable two-chip analog-to-digital

converter. The isolated modulator allows direct mea-

surement of motor phase currents in power inverters.

In operation, the HCPL-7560 Isolated Modulator (op-

tocoupler with 3750 V

RMS

dielectric withstand voltage

rating) converts a low-bandwidth analog input into a

high-speed one-bit data stream by means of a Sigma-

Delta (Σ-∆) over-sampling modulator. This modulation

provides for high noise margins and excellent immunity

against isolation-mode transients. The modulator data

and on-chip sampling clock are encoded and transmit-

ted across the isolation boundary where they are recov-

ered and decoded into separate high-speed clock and

data channels.

Features

• 8-bit Linearity

• 200 ns Conversion Time

(Pre-Trigger Mode 2 with HCPL-0872)

• 8-bit Eective Resolution with 5µs Signal Delay

(14-bit with 102 µs) (with HCPL-0872)

• Fast 3 µs Over-Range Detection (with HCPL-0872)

• ± 200 mV Input Range with Single 5 V Supply

• 5% Internal Reference Voltage Matching

• Oset Calibration (with HCPL-0872)

• -40°C to +85°C Operating Temperature Range

• 15 kV/µs Isolation Transient Immunity

• Safety Approval: UL 1577, CSA and

IEC/EN/DIN EN 60747-5-2

Applications

• Motor Phase and Rail Current Sensing

• Data Acquisition Systems

• Industrial Process Control

• Inverter Current Sensing

• General Purpose Current Sensing and Monitoring

HCPL-7560

Optically Isolated Sigma-Delta (Σ-∆) Modulator

Data Sheet

CAUTION: It is advised that normal static precautions be taken in handling and assembly

of this component to prevent damage and/or degradation, which may be induced by ESD.

Lead (Pb) Free

RoHS 6 fully

compliant

RoHS 6 fully compliant options available;

-xxxE denotes a lead-free product

NOTE: A 0.1 μF bypass capacitor must be connected between pins VDD1 and GND1 and between pins VDD2 and GND2.

SIGMA-

DELTA

MOD./

ENCODE

DECODE

Input

Current

HCPL-0872

Digital Filter

MCU

DSP

HCPL-7560

Pin Description

DD1

IN+

IN-

GND1

DD2

MCLK

MDAT

GND2

SHIELD

ISOLATION

BOUNDARY

DECODE

SIGMA-

DELTA

MOD./

ENCODE

HCPL-7560

Symbol Description

DD1

Supply voltage input (4.5 V to 5.5 V)

IN+

Positive input ( ± 200mV recommended)

IN-

Negative input (normally connected to GND1)

GND1 Input ground

DD2

Supply voltage input (4.5 V to 5.5 V)

MCLK Clock output (10 MHz typical)

MDAT Serial data output

GND2 Output ground

Ordering Information

HCPL-7560 is UL Recognized with 3750 Vrms for 1 minute per UL1577.

Part number

Option

Package

Surface

Mount

Gull

Wing

Tape

& Reel

IEC/EN/DIN EN

60747-5-2 Quantity

RoHS

Compliant

Non-RoHS

Compliant

HCPL-7560 -000E No option 300 mil DIP-8 50 per tube

-300E -300 X X 50 per tube

-500E -500 X X X 1000 per reel

-060E -060 X 50 per tube

-360E -360 X X X 50 per tube

-560E -560 X X X X 1000 per reel

To order, choose a part number from the part number column and combine with the desired option from the option

column to form an order entry.

Example 1:

HCPL-7560-560E to order product of Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/

DIN EN 60747-5-2 Safety Approval in RoHS compliant.

Example 2:

HCPL-7560 to order product of 300 mil DIP-8 package in tube packaging and non-RoHS compliant.

Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.

Package Outline Drawings

8-pin DIP Package

8-pin Gull Wing Surface Mount Option 300

0.635 ± 0.25

(0.025 ± 0.010)

NOM.

9.65 ± 0.25

(0.380 ± 0.010)

0.51 ± 0.130

(0.020 ± 0.005)

7.62 ± 0.25

(0.300 ± 0.010)

9.80 ± 0.25

(0.386 ± 0.010)

6.350 ± 0.25

(0.250 ± 0.010)

1.02 (0.040)

1.27 (0.050)

10.9 (0.430)

2.0 (0.080)

LAND PATTERN RECOMMENDATION

1.080 ± 0.320

(0.043 ± 0.013)

3.56 ± 0.13

(0.140 ± 0.005)

1.780

(0.070)

MAX.

1.19

(0.047)

MAX.

2.540

(0.100)

BSC

0.255 (0.075)

0.010 (0.003)

NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.

DIMENSIONS IN MILLIMETERS (INCHES).

TOLERANCES (UNLESS OTHERWISE SPECIFIED):

xx.xx = 0.01

xx.xxx = 0.005

LEAD COPLANARITY

MAXIMUM: 0.102 (0.004)

MOLDED

9.80 ± 0.25

(0.386 ± 0.010)

1.78 (0.070) MAX.

1.19 (0.047) MAX.

A 7560 Z

YYWW

DATE CODE

1.080 ± 0.320

(0.043 ± 0.013)

2.54 ± 0.25

(0.100 ± 0.010)

0.51 (0.020) MIN.

0.65 (0.025) MAX.

4.70 (0.185) MAX.

2.92 (0.115) MIN.

5678

4321

5˚ TYP.

0.20 (0.008)

0.33 (0.013)

7.62 ± 0.25

(0.300 ± 0.010)

6.35 ± 0.25

(0.250 ± 0.010)

DIMENSIONS IN MILLIMETERS AND (INCHES).

NOTE: FLOATING LEAD PROTUSION IS 0.5 mm (20 mils) MAX.

NOTE: INITIAL OR CONTINUED VARIATION IN THE COLOR OF THE HCPL-7560’S WHITE MOLD COMPOUND IS NORMAL AND DOES NOT

AFFECT DEVICE PERFORMANCE OR RELIABILITY.

3.56 ± 0.13

(0.140 ± 0.005)

OPTION CODE

* MARKING CODE LETTER FOR OPTION NUMBERS

"V" = OPTION 060

OPTION NUMBERS 300 AND 500 NOT MARKED.

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18

HCPL-7560-500

Mfr. #:

Buy HCPL-7560-500

Manufacturer:

Broadcom / Avago

Description:

Optically Isolated Amplifiers Isolated Modulator

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

HCPL-7560-500

HCPL-7560-500

Products related to this Datasheet