PROTEKTIVE PAK
13520 MONTE VISTA AVENUE, CHINO, CA 91710
PHONE (909) 627-2578, FAX (909) 363-7331
ProtektivePak.com
DRAWING NUMBER
39508
DATE:
February
2012
Small Component Shippers, Black Foam
© 2012 DESCO INDUSTRIES INC.
Employee Owned
Protektive Pak Impregnated Corrugated Specifications
Properties Typical Values Test Procedures/Method
Surface Resistance: 1 x 10E6 to < 1 x 10E9 ohms ANSI/ESD S11.1
Static Shielding: 99.9% attenuation at 10kV; 99.6% attenuation at 30kV EIA 541, appendix E, capacitive probe test
Made in the
United States of America
Features
• EfficientmeansofshippingorstoringESDsensitivecircuitboardsand
other items in accordance with ANSI/ESD S20.20 & ANSI/ESD S541
• Conductivecrosslinkblackpolyethylenecushiongradefoam(3/8"thick,
Rv < 10^4 ohms) laminated to top, and conductive crosslink black
polyethylenepininsertiongradefoam(1/4"thick,Rv<10^4 ohms) in
bottom(Alldimensionsare±1/16")
• Impregnatedcorrugatedstaticdissipativesurfaceof1x10E6to<1x
10E9 ohms per ANSI/ESD S11.1 and IEC 61340-2-3
• Noassemblyrequired
• MadeinAmerica
Specications and procedures subject to change without notice
L
W
D
Note: These are inside Dimensions
Item Size I.D. - L x W x D (IN)
39508 2-1/2” x 1-1/4” x 1”
39536 3-7/16” x 2-1/8” x 1”
39542 3-3/4” x 3-3/4” x 1”
39550 7” x 3-1/2” x 1”
Per Packaging standard ANSI/ESD section 6.2 Outside an EPA “Transportation of
sensitive products outside of an EPA shall require packaging that provides:
1. Low charge generation.
2. Dissipative or conductive materials for intimate contact.
3. A structure that provides electrostatic discharge shielding.”
