EVAL-ADF4350EB1Z Datasheet EVAL-ADF4350EB1Z | P10-P12

UG-109 Evaluation Board User Guide

Rev. 0 | Page 10 of 12

ORDERING INFORMATION

BILL OF MATERIALS

Table 1.

Qty Reference Designator Description

1 C1 Ceramic capacitor, 2.7 nF, 0603, 100 V, X7R

1 C2 Ceramic capacitor, 47 nF, 0603, 25 V, X7R

1 C3 Ceramic capacitor, 680 pF, 0603, 50 V, X7R, SMD

4 C4, C27, C32, C34 Capacitor, 1 μF, 0603, 10 V, X5R

21 C5, C8, C10, C13, C17, C18, C21, C22,

C25, C28, C29, C30, C53, C54, C55, C57,

C58, C59, C60, C61, C69

Ceramic capacitor, 0.1 μF, 0402, 16 V, X7R

10 C6, C7, C14, C15, C16, C19, C20, C23,

C52, C56

Ceramic capacitor, 10 pF, 0402, 50 V, NP0

1 C9 Ceramic capacitor+, 1 μF, 0805, RTAJ_A, 16 V, X7R

3 C11, C12, C49 Ceramic capacitor, 1 nF, 0603, 50 V, NP0

2 C24, C36 Ceramic capacitor, 120 pF, 0402, 50 V, NP0

2 C26, C35 Ceramic capacitor, 1 nF, 0402, 50 V, NP0

2 C31, C62 Ceramic capacitor, 12 pF, 0603, 50 V, NPO, SMD

1 C33 Capacitor+, 22 μF, 16 V, RTAJ_B, tantalum TAJ-B 22UF, 10%

2 C47, C50 Ceramic capacitor, 1 μF, 0603, 25 V, X5R

2 D1, D6 0805 green LED

2 D2, D4 Zener diode, 6.8 V, SOT-23, 350 MW

1 D5 0805 red LED

2 L1, L4 Inductor, 0 Ω 0402 SMD resistor

2 L2, L3 Inductor, 7.5 nH L0402 0402 chip inductor

1 L10 0603 ferrite bead

1 R1 Resistor, 360 Ω, 0603, SMD

2 R2, R38 Resistor, 1 kΩ, 0603, SMD

11 R3, R4, R10, R13, R20, R22, R51, R52,

R56, R58, R59

Resistor, 0 Ω, 0603, SMD

13 R5, R6, R8, R9, R11, R14, R18, R21,

R46, R53, R54, R55, R57

Resistor location, DNI, 0603—not inserted

3 R7, R44, R45 Resistor 100 Ω 0603 SMD

1 R12 Resistor 4.7 kΩ, 0603, SMD

4 R15, R16, R17, R19 Resistor, 10 kΩ, 0603, SMD

2 R23, R27 Resistor, 0 Ω, 0402, SMD

3 R24 to R26 Resistor, DNI, 0603, SMD

3 R39, R49, R50 Resistor, 2.2 kΩ, 0603, SMD

1 R40 Resistor, 140 kΩ, 0603, SMD

1 R41 Resistor, 78.7 kΩ, 0603, SMD

13 3V3_USB, 5V_USB, AVDD, CE, CLK, DATA,

LD, LE, MUXOUT, PDRF, T1, T2, VOUT

Red testpoint

3 REFIN, RFOUTA+, RFOUTA− SMA_CARD_EDGE_RF, end-launch 50 Ω SMA jack

2 S1, S2 SW_POWER SW_SIP-3P PCB mount SPDT switch

1 U1 ADF4350 LFCSP-32 PLL

2 U2, U3 ADP150-TSOT TSOT-5 linear regulator

1 U5 ADP3334 MSO8 adjustable LDO regulator

1 U6 CY7C68013-CSP, LFCSP-56_RP, USB microcontroller

1 U7 24LC64, SO8NB, 64K I

C serial EEPROM

1 USB USB mini-B connector (usb-otg)

1 GND Black 4 mm banana socket

1 VSUPPLY Red 4 mm banana socket

1 Y1 OSC_TCXO_IT3200C 26 MHz TCXO-IT3200C TCXO

1 Y1 (ALT) OSC_TCXO-RAKON-TXO200B, 25 MHz, SMD temperature compensated crystal oscillator

1 Y2 XTAL1-CSM-8A, 24.0 MHz, XTAL-CSM-8A, SMD crystal

Evaluation Board User Guide UG-109

Rev. 0 | Page 11 of 12

NOTES

UG-109 Evaluation Board User Guide

Rev. 0 | Page 12 of 12

NOTES

ESD Caution

ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection

circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

Legal Terms and Conditions By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be

bound by the terms and conditions set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not

use the Evaluation Board until you have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you

(“Customer”) and Analog Devices, Inc. (“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to

Customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that

the Evaluation Board is provided for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made

subject to the following additional limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation

Board. As used herein, the term “Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not

expressly granted herein, including ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary

information of ADI. Customer may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this

Agreement, Customer agrees to promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board.

Customer shall inform ADI of any occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material

content of the Evaluation Board. Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any

time upon giving written notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS”

AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS

OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF

INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S

POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES

SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will

comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the

Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and

Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is

expressly disclaimed.

registered trademarks are the property of their respective owners.

UG08907-0-3/10(0)

P1-P3 P4-P6 P7-P9 P10-P12

EVAL-ADF4350EB1Z

Mfr. #:

Buy EVAL-ADF4350EB1Z

Manufacturer:

Analog Devices Inc.

Description:

Clock & Timer Development Tools Evaluation Board

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

EVAL-ADF4350EB1Z