Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201679H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 3, 2018 1
DATA SHEET
SKY13416-485LF: 0.1 to 3.8 GHz SP6T Antenna Switch
Applications
Any 2G/3G/4G antenna diversity or LTE (TDD/FDD)
transmit/receive system for which GSM transmit is not required
Features
Broadband frequency range: 0.1 to 3.8 GHz
Low insertion loss: 0.5 dB typical @ 2.7 GHz
High isolation: >26 dB @ 2.7 GHz
Integrated logic
Small QFN (14-pin, 2.0 x 2.0 mm) package
(MSL1, 260 C per JEDEC J-STD-020)
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
Description
The SKY13416-485LF is a single pole, six-throw (SP6T) antenna
switch. The high-linearity performance and low insertion loss
achieved by the SKY13416-485LF make it an ideal choice for
main/diversity switching commonly used in LTE-based handsets,
data cards, and tablets that use antenna diversity solutions.
The SKY13416-485LF is part of a scalable family of products that
covers SP4T through SP8T switches that allow up to eight bands
of WCDMA/LTE:
SKY13414-485LF SP4T Antenna Switch (Data Sheet #201689)
SKY13415-485LF SP5T Antenna Switch (Data Sheet #201704)
SKY13416-485LF SP6T Antenna Switch (this Data Sheet)
SKY13417-485LF SP7T Antenna Switch (Data Sheet #201661)
SKY13418-485LF SP8T Antenna Switch (Data Sheet #201712)
The symmetric port designs provide flexibility in signal routing for
both receive diversity and higher power
TD-SCDMA/TDD-LTE, WCDMA/FDD, and LTE transmit/receive
applications.
DecoderBias
RF1
RF2
RF3
RF4
RF5
RF6
VDD
V1
V2
V3
ANT
201679-001
Figure 1. SKY13416-485LF Block Diagram
Switching is controlled by three CMOS/TTL-compatible control
voltage inputs (V1, V2, and V3). Depending on the logic voltage
level applied to the control pins, the ANT pin is connected to one
of six switched RF outputs (RF1 to RF6) using a low insertion loss
path, while the paths between the ANT pin and the other RF pins
are in a high isolation state. No external blocking capacitors are
required on the RF paths unless VDC is externally applied.
The SKY13416-485LF is manufactured in a compact, 14-pin
2.0 x 2.0 mm, Quad Flat No-Lead (QFN) package.
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.