REV. E
AD706
–3–
SPECIFICATIONS
(continued)
AD706J/A
Parameter Conditions Min Typ Max Unit
POWER SUPPLY
Rated Performance ±15 V
Operating Range ±2.0 ±18 V
Quiescent Current, Total 0.75 1.2 mA
T
MIN
to T
MAX
0.8 1.4 mA
TRANSISTOR COUNT Number of Transistors 90
NOTES
1
Bias current specifications are guaranteed maximum at either input.
2
Input bias current match is the difference between corresponding inputs (I
B
of –IN of Amplifier 1 minus I
B
of –IN of Amplifier 2).
CMRR match is the difference between
∆
∆
V
V
OS1
CM
for Amplifier 1 and
∆
∆
V
V
OS2
CM
for Amplifier 2, expressed in dB.
PSRR match is the difference between
∆
∆
V
V
OS1
SUPPLY
for Amplifier 1 and
∆
∆
V
V
OS2
SUPPLY
for Amplifier 2, expressed in dB.
All min and max specifications are guaranteed.
Specifications subject to change without notice.
ABSOLUTE MAXIMUM RATINGS
1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 V
Internal Power Dissipation
(Total: Both Amplifiers)
2
. . . . . . . . . . . . . . . . . . . . 650 mW
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±V
S
Differential Input Voltage
3
. . . . . . . . . . . . . . . . . . . . . . +0.7 V
Output Short Circuit Duration . . . . . . . . . . . . . . . . Indefinite
Storage Temperature Range (N, R) . . . . . . . –65°C to +125°C
Operating Temperature Range
AD706J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
AD706A . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Lead Temperature (Soldering 10 secs) . . . . . . . . . . . . . 300°C
NOTES
1
Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2
Specification is for device in free air:
8-Lead Plastic Package: θ
JA
= 100°C/W
8-Lead Small Outline Package: θ
JA
= 155°C/W
3
The input pins of this amplifier are protected by back-to-back diodes. If the
differential voltage exceeds ± 0.7 V, external series protection resistors should be
added to limit the input current to less than 25 mA.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although the
AD706 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended
to avoid performance degradation or loss of functionality.
ORDERING GUIDE
Temperature Package
Model Range Description Option
AD706JN 0°C to 70°C Plastic DIP N-8
AD706JR 0°C to 70°C SOIC R-8
AD706JR-REEL 0°C to 70°CTape and Reel R-8
AD706JR-REEL7 0°C to 70°CTape and Reel R-8
AD706AR –40°C to +85°C SOIC R-8
AD706AR-REEL –40°C to +85°CTape and Reel R-8
AD706AR-REEL7 –40°C to +85°CTape and Reel R-8
AD706ARZ-REEL* –40°C to +85°CTape and Reel R-8
*Lead-free part.
METALIZATION PHOTOGRAPH
Dimensions shown in inches and (mm).
Contact factory for latest dimensions.
2
1
3
4
5
6
7
8
OUTPUT A
–INPUT A
+INPUT A
–V
S
0.074 (1.88)
OUTPUT B
–INPUT B
+INPUT B
0.118 (3.00)
+V
S
