Trimmer Capacitors
PCB Mounting
• When our recommended landpattern is not used, please check
mounting alignment.
• When mounting on PCB, please do not apply pressure to trimmer
capacitors over 500g.f.
Soldering
• When using soldering iron, adjust iron tip to 280
°
C max.
• Please find below recommended solder profile.
250
300
200
150
100
50
0
250200150100500
Temp. [oC]
Time [Sec.]
・Peak: 250oC Over 10 sec. max.
・Preheat: 160VQ190oC 120 sec.
・220°C Over 60 sec. max.
Storage Conditions
1) Do not store components in corrosive condition such as chloric or
sulfuric environment.
2) Components before use should be stored under the condition with
temperature of 5 to 40 degrees Celsius and humidity of 20 to 70%
RH.
3)
It is recommended to use components within 6 months of incoming.
4) Do not open the minimal package until right before the use.
5) Do not store components under direct sunlight or dewy
environment.
Screwdrivers
Please use proper screwdriver for adjustment of the capacitor.
Kyocera can supply suitable ceramic type screwdrivers specially
designed for the use of CTZ series. Please contact your local AVX
office for the details.
CTZ3
Pin Head
⊕
: CTZ3 Phillips-head (Plus) Ceramic Screwdriver
CTZ2
Pin Head
⊕
: CTZ2 Phillips-head (Plus) Ceramic Screwdriver
φ
10
φ
12
φ
10.05
φ
4.8
125
110
96
110
(CTZ3 Phillips-head (Plus) Screwdriver)
(CTZ2 Phillips-head (Plus) Screwdriver)
Driver Head Type
(CTZ3 Phillips-head (Plus))
(3.60)
1.30
2.6
1.2 0.35
(CTZ2 Phillips-head (Plus))
R1.2
(2.0) 0.19
0.85
1.6
