© NXP B.V. 2015. All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
LPCXpresso18S37 Development Board
Rev. 1.0 — 19
th
January 2015
The LPCXpresso family of boards provides a powerful and flexible development system for NXP's
Cortex-M MCUs. The LPCXpresso18S37 board has been developed by NXP to enable evaluation of and
prototyping with the LPC4300 family of MCUs, and features the LPC18S37 in its 100 PIN BGA package
option.
Feature summary
The LPCXpresso18S37 board includes the following features:
LPC18S37 MCU running at up to 180MHz
On-board high-speed USB based debug probe with CMSIS-DAP and LPCXpresso IDE Redlink
protocol options, can debug the on-board LPC18S37 or external target
Support for external debug probes
Tri-color LED
Target Reset, ISP and WAKE buttons
Expansion options based on Arduino UNO R3 and Pmod™, plus additional expansion port pins
On-board Ethernet PHY (output available at expansion connectors)
High speed USB A/B connector for host or slave operation
8Mb Macronix quad SPI flash
UART, I
2
C and SPI port bridging from LPC18S37 target to USB via the on-board debug probe
FTDI UART connector
A7001CM Secure Element
LPCXpresso IDE
LPCXpresso IDE supports programming and debugging LPCXpresso boards using the on-board CMSIS-
DAP debug interface, or with an external debug probe such as LPC-Link2. LPCXpresso18S37 is ready
for use with the LPCXpresso IDE. An external debug probe can be used by simply connecting it to the
board via the P1 connector and powering the board via the J3 USB connection.
