3273000

https://www.phoenixcontact.com/pi/products/3273000

08/18/2018Page1/6

Distribution block-PTFIX 6X2,5-NS35 GY-3273000

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Distribution block, Block with vertical alignment, nom. voltage: 500 V, nominal current: 24 A, connection

method: Push-in connection, number of connections: 6, cross section:0.14 mm²-4 mm², AWG:26-12, width:

28.6 mm, height: 28.7 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

Key Commercial Data

Packing unit 10 STK

Minimum order quantity 10 STK

GTIN

GTIN 4055626390437

Technical data

General

Note

Notes on operation The blocks can be bridged with one another via the

conductor shaft. For corresponding plug-in bridges, see accessories

Flammability rating according to UL 94 V0

Rated surge voltage 6 kV

Degree of pollution 3

https://www.phoenixcontact.com/pi/products/3273000

08/18/2018Page2/6

Distribution block-PTFIX 6X2,5-NS35 GY-3273000

Technical data

General

Overvoltage category III

Insulating material group I

Maximum power dissipation for nominal condition

0.77 W (the value is based on one connection block and is multiplied

N

500 V

Open side panel No

Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11

Back of the hand protection guaranteed

Finger protection guaranteed

Result of surge voltage test Test passed

Surge voltage test setpoint 9.8 kV

Result of power-frequency withstand voltage test Test passed

Power frequency withstand voltage setpoint 1.89 kV

Bending test conductor cross section/weight 0.14 mm² / 0.2 kg

2.5 mm² / 0.7 kg

4 mm² / 0.9 kg

Tensile test result Test passed

Conductor cross section tensile test 0.14 mm²

Tractive force setpoint 10 N

Conductor cross section tensile test 2.5 mm²

Tractive force setpoint 50 N

Conductor cross section tensile test 4 mm²

Tractive force setpoint 60 N

Short circuit stability result Test passed

Conductor cross section short circuit testing 2.5 mm²

Short-time current 0.3 kA

Conductor cross section short circuit testing 4 mm²

Short-time current 0.48 kA

https://www.phoenixcontact.com/pi/products/3273000

08/18/2018Page3/6

Distribution block-PTFIX 6X2,5-NS35 GY-3273000

Technical data

General

Result of thermal test Test passed

Ageing test for screwless modular terminal block temperature cycles 192

Proof of thermal characteristics (needle flame) effective duration 30 s

Result of aging test Test passed

Oscillation, broadband noise test result Test passed

Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03

Test spectrum Service life test category 2, bogie-mounted

Acceleration 3.12 g

Test duration per axis 5 h

Test directions X-, Y- and Z-axis

Shock test result Test passed

Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03

Shock form Half-sine

Acceleration 30g

Shock duration 18 ms

Number of shocks per direction 3

Test directions X-, Y- and Z-axis (pos. and neg.)

Flame test method (DIN EN 60695-11-10) V0

Oxygen index (DIN EN ISO 4589-2) >32 %

NF F16-101, NF F10-102 Class I 2

NF F16-101, NF F10-102 Class F 2

Surface flammability NFPA 130 (ASTM E 162) passed

Specific optical density of smoke NFPA 130 (ASTM E 662) passed

Smoke gas toxicity NFPA 130 (SMP 800C) passed

Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3