DRAWING
NUMBER
12910
DATE
January
2017
© 2017 DESCO INDUSTRIES INC.
Employee Owned
STATSHIELD® 81705 SERIES
Made in the
United States of America
*Passes on all surfaces noted in MIL-PRF-81705E Special Requirement 6/
Bag is free of silicones and heavy metals.
Specifications and procedures subject to change without notice.
RoHS 2, REACH, and Conict Minerals Statement
See the Desco Industries RoHS 2, REACH, and Conflict
Minerals Statement:
http://www.descoindustries.com/ROHS2.aspx
See the Desco Limited Warranty:
http://desco.descoindustries.com/Limited-Warranty.aspx
Markings:
Group A
Material identication printed between polyester and aluminum shielding layer. Specication
number, type, class, manufacturer's name, manufacturer's designation, month and year of
manufacture, lot number and heat sealing conditions (temperature, pressure and dwell time). Not
shown to scale. Color: black. Appears every 6 inches along length of the material. Meets marking
requirements of MIL-PRF-81705E: 3.6
Group B
Identication hot stamped on surface layer. Specication number, revision letter, type, class,
manufacturer's name, manufacturer's designation, and lot number. Not shown to scale.
Color: yellow. Meets marking requirements of MIL-DTL-117H: 3.5 for converted bags.
This product is on the Qualied Product Listing under the Defense Standardization Program.
Check our listing here.
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com
PHONE (909) 627-8178
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370
STATSHIELD
®
81705 SERIES
Specifications:
Standard Document Meets Requirements of:
MIL-PRF-81705E Type III, Class 2
MIL-DTL-117H Type II, Class H, Style 2
Electrical Properties Typical Values Test Procedures/Method
Surface Resistance:
Outer Surface < 1 x 10
12
ohms/sq MIL-PRF-81705E, 4.6.8
Inner Surface ≥ 1 x 10
5
to < 1 x 10
12
ohms/sq MIL-PRF-81705E, 4.6.8
Discharge Shielding ≤ 10 nJ MIL-PRF-81705E, 4.6.9
EMI Attenuation ≥ 10 db MIL-PRF-81705E, 4.6.7
Static Decay ≤ 2 seconds MIL-STD-3010, 4046
Physical Properties
Film Thickness 2.8 mils, 0.071 mm ± 10% MIL-STD-3010, 1003
Tensile Strength 4600 PSI, 32 MPa ASTM D882
Puncture Resistance 12 lbs, 53 N MIL-STD-3010, 2065
Non-corrosive Pass MIL-STD-3010, M3005*
Marking Abrasion Resistance Pass MIL-PRF-81705E, 4.6.6
Transparency 40% MIL-STD-3010, 4034
Heat Sealing Conditions
Temperature 360°F, 182°C
Time 2 seconds
Pressure 60 PSI, 414 KPa
Note: Default hot stamp color is yellow. Artwork not to scale.
Static Dissipative Coating
Low Charging Static
Dissipative Proprietary
Outer Polyester Layer
Aluminum Shielding Layer
Low Charging Static
Dissipative Proprietary
Inner Polyethylene Layer
Weld
Seal
####
Group A
Group B
Group A
Soft Fold Bottom
