OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

PVDZ172NSPBF

P1-P3P4-P6
General Description
The PVDZ172N Photovoltaic Relay is a single-pole,
normally open solid state relay that can replace
electromechanical relays used for general purpose
switching of DC loads. It utilizes International
Rectifier’s HEXFET power MOSFET as the output
switch, driven by an integrated circuit photovoltaic
generator of novel construction. The output switch is
controlled by radiation from a GaAlAs light emitting
diode (LED) which is optically isolated from the
photovoltaic generator.
These units overcome the limitations of both
electromechanical and reed relays by offering the
solid-state advantages of high sensitivity,
miniaturization, no contact bounce, long operational
life, insensitivity to external magnetic fields, shock
and vibration, and high reliability inherent with solid
state technology. They are ideally suited for switching
high currents or low level signals without distortion
or injection of electrical noise.
These relays are packaged in 8-pin, molded DIP
packages and available with thru-hole and surface-
mount (gull-wing) leads, in plastic shipping tubes.
(HEXFET is the registered trademark for International Rectifier Power MOSFETs)
Applications
Portable Electronics
Programmable Logic Controllers
Computers and Peripheral Devices
Audio Equipment
Power Supplies and Power Distribution
Instrumentation
Part Identification
PVDZ172NPbF thru-hole
PVDZ172NSPbF surface-mount
(gull-wing)
PVDZ172NS-TPbF surface-mount, tape
and reel
Features
250mΩ On-Resistance
Bounce-Free Operation
1.5 Amp capacity
4,000 V
RMS
I/O Isolation
Solid-State Reliability
UL recognized
ESD Tolerance:
4000V Human Body Model
500V Machine Model
Microelectronic Power IC
HEXFET
®
Power MOSFET Photovoltaic Relay
Single-Pole, Normally-Open, 0-60V AC, 1.5A
PVDZ172NPbF
1 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback April 29, 2015
PVDZ172NPbF
2 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback April 29, 2015
GENERAL CHARACTERISTICS Limits Units
Dielectric Strength, Input-Output 4000 V
(RMS)
Insulation Resistance, Input-Output , 90 V
DC
10
12
@T
A
=+25°C - 50% RH Ω
Capacitance, Input-Output 1.0 pF
Lead Temperature (1.6mm below seating plane) for 10 seconds +260 °C
Ambient Temperature Range: Operating -40 to +85 °C
Storage -40 to +100 °C
OUTPUT CHARACTERISTICS Units
Operating Voltage Range 0 to 60 V(DC)
Maximum Load Current 40
°
C (see figures 1 and 2) 1.5 A(DC)
Maximum Pulsed Load Current @TA=+25°C (100 ms @ 10% duty cycle) 4.0 A(DC)
Maximum Turn-On Time @TA=+25°C (see figure 7) 2.0 ms
For 500mA, 50V
DC
Load, 10mA Control
Maximum Turn-Off Time @T
A
=+25°C (see figure 7) 0.5 ms
For 500mA, 50V
DC
Load, 10mA Control
Maximum On State Resistance @T
A
=+25°C(pulsed) (see figure 4) 250 mΩ
1.0A load, 10mA Control
Minimum Off State Resistance @T
A
=+25°C @ 48 V
DC
(see figure 5) 10
8
Ohms
Minimum Off-State dv/dt 1000 V/µs
Output Capacitance (see figure 9) 150 pF @ 50 VDC
Electrical Specifications (-40°C ≤ T
A
≤ =+85°C unless otherwise specified)
INPUT CHARACTERISTICS Limits Units
Minimum Control Current (see figures 1 and 2) 10 mA
Maximum Control Current for Off-State Resistance
@ T
A
=+25°C
0.4 mA
Control Current Range (Caution: Current limit input LED, see figure 6) 5.0 to 25 mA
Maximum Reverse Voltage 6.0 V
International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications.
Users of this International Rectifier product in such applications assume all risks of such use and indemnify International
Rectifier against all damages resulting from such use.
PVDZ172NPbF
3 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback April 29, 2015
Figure 2. Typical Control Current
Requirements
Figure 3. Typical On-Characteristics
Figure 1. Current Derating Curves
Figure 4. Typical On-Resistance
0
Max. Load Current (A)
Ambient Temperature (deg. C)
1.8
1.5
1.2
0.9
0.6
0.3
20
0
40
60 80
100
ILED = 10mA
ILED = 5mA (Typical)
LED Control Current (mA)
Max. Load Current (A)
0.25
0
0.50
0.75
1.00
1.25
1.50
1.75
2.00
1
5
4
3
2
+25 deg. C
+40 deg. C +60 deg. C
+80 deg. C
1.4
Vds (V)
Load Current (A)
1.6
1.2
1.0
0.8
0.6
0.4
0.2
0
0.10 0.2 0.3 0.4 0.5
ILED = 10mA
+25 deg. C
+60 deg. C
+80 deg. C
+40 deg. C
60
0
-40 0
20 40 80
100
-20
Ambient Temperature (deg. C)
250
50
100
150
200
300
350
400
Rd-on (mOhm)
Wiring Diagrams
Electromechanical
Analogy
Schematic
Anode
Cathode
Source
Drain
5
8
DC
P1-P3P4-P6

PVDZ172NSPBF

Mfr. #:
Buy PVDZ172NSPBF
Manufacturer:
Infineon / IR
Description:
Solid State Relays - PCB Mount 60V 1 FORM A PHOTO VOLTAIC RELAY MOD.
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet