2
Internal Circuit Diagram
Absolute Maximum Ratings
[1]
Parameter
Red
HDSP-4820
AlGaAs Red
HLCP-J100
HER
HDSP-4830
Yellow
HDSP-4840
Green
HDSP-4850
Average PowerDissipation per LED
(T
A
= 25°C)
63 mW 37 mW 87 mW 50 mW 105 mW
Peak Forward Current per LED
150 mA
[2]
45 mA
[3]
90 mA
[4]
60 mA
[4]
90 mA
[4]
DC Forward Current per LED
30 mA
[5]
15 mA
[5]
30 mA
[6]
20 mA
[6]
30 mA
[6]
Operating Temperature Range -40°C to +85°C -20°C to +100°C -40°C to +85°C -20°C to +85°C
Storage Temperature Range
-40°C to +85°C -55°C to +100°C -40°C to +85°C
Reverse Voltage per LED 3.0 V 5.0 V 3.0 V
Lead Solder Dipping Temperature
(1.59 mm (1/16 inch)
below seating plane)
[7]
260°C for 5 seconds
[8]
Wave Soldering Temperature
(at 2 mm distance from the body)
250°C for 3 seconds
Notes:
1. Absolute maximum ratings for HER, Yellow, and Green elements of the multicolor arrays are identical to the HDSP-4830/4840/4850 maximum
ratings.
2. See Figure 1 to establish pulsed operating conditions. Maximum pulse width is 1.5 ms.
3. See Figure 2 to establish pulsed operating conditions. Maximum pulse width is 1.5 ms.
4. See Figure 8 to establish pulsed operating conditions. Maximum pulse width is 2 ms.
5. Derate maximum DC current for Red above T
A
= 62°C at 0.79 mA/°C, and AlGaAs Red above T
A
= 91°C at 0.8 mA/°C. See Figure 3.
6. Derate maximum DC current for HER above T
A
= 48°C at 0.58 mA/ °C, Yellow above T
A
= 70°C at 0.66 mA/°C, and Green above T
A
= 37°C at 0.48
mA/°C. See Figure 9.
7. Clean only in water, isopropanol, ethanol, Freon TF or TE (or equivalent), or Genesolve DI-15 (or equivalent).
8. Maximum tolerable component side temperature is 134°C during solder process.
120
a
10 11
j
219
318
417
516
615
714
813
912
b
c
d
e
f
g
h
i
Pin Function Pin Function
1 Anode a 11 Cathode j
2 Anode b 12 Cathode I
3 Anode c 13 Cathode h
4 Anode d 14 Cathode g
5 Anode e 15 Cathode f
6 Anode f 16 Cathode e
7 Anode g 17 Cathode d
8 Anode h 18 Cathode c
9 Anode i 19 Cathode b
10 Anode j 20 Cathode a