Recommended Application Layout
MIN.
0.25 [6.4mm]
45° x 0.15 [3.8mm]
CHAMFER
0.312 [7.9mm]
0.250 [6.4mm]
0.250 [6.4mm]
CARD THICKNESS
0.27 [6.9mm]
0.78 [19.8mm]
1.12 [28.3mm]
0.56 [14.3mm]
0.13 [3.2mm]
0.30 [7.6mm]
0.14 [3.5mm]
0.69 [17.5mm]
Ø.080 [Ø2.0mm]
Ø.093 [Ø2.4mm]
0.29 [7.4mm]
0.15 [3.8mm]
0.10 [2.5mm]
0.35 [8.8mm]
0.125 [3.2mm]
Ø.085 [Ø2.2mm]
Ø.109 [Ø2.8mm]
0.18 [4.5mm]
MIN.
0.563 [14.3mm]
STANDARD TOLERANCE
( UNLESS OTHERWISE SPECIFIED )
S. Irving
R. Dienst
CHECKED:
.XX ± .01
.XXX ± .005
.X ± .1
DECIMALS
DESIGNED:
LP-06
G
09/21/98
CAD GENERATED DOCUMENT
DO NOT MEASURE DRAWING.
CAGE CODE : 32559
04/06/00
DATE:
21
SHEET # OF
TEL: (949) 951-8808 FAX: (949) 951-3974
4 THOMAS, IRVINE, CA. 92618
CIRCUIT BOARD CARD EJECTOR
PART NO:
TITLE:
X° ± 1°
ANGULAR
DATE:
®
REVISION:
Production Release
REV.
F
02/27/04
DESCRIPTION
DATE
APPROVED
M. C.
Added Notes 4, 5, 6 & Color Options Sheet #2
G 05/16/16 J. C.
5. PRE-ASSEMBLED ROLL PINS AVAILABLE UPON REQUEST.
4. ROLL PINS INCLUDED. PACKAGED SEPARATELY.
3. MATERIAL: NYLON 6/6, 94V-2, WHITE.
2. MATERIAL: NYLON 6/6, 94V-2, NATURAL.
1. GENERAL SPECIFICATIONS: BIVAR MOLDED COMPONENT SPECIFICATION BV00-E101.
PART NO. COLOR ROLL PIN
CARD
THICKNESS
LP-06 NT
NATURAL
RP-250
1/16"(1.6mm)
LP-06 WE
WHITE
RP-250
LP-06 XX
SEE S.#2
RP-250
