Vishay Siliconix
SiP32451, SiP32452, SiP32453
Document Number: 63315
S12-2345-Rev. D, 8-Oct-12
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical questions, contact: powerictechsupport@vishay.com
0.9 V to 2.5 V, 55 m Load Switch in WCSP4
DESCRIPTION
SiP32451, SiP32452 and SiP32453 are n-channel integrated
high side load switches that operate from 0.9 V to 2.5 V input
voltage range.
SiP32451, SiP32452 and SiP32453 have low input logic
control threshold that can interface with low voltage control
GPIO directly without extra level shift or driver. There is a pull
down at this EN logic control pin.
Turn on time is fast, less than 25 µs typically for input
voltage of 1.2 V or higher. SiP32451 and SiP32452 have
fast turn off delay time of less than 1 µs while SiP32453
features a guaranteed turn off delay of greater than 30 µs,
typically 90 µs.
SiP32451 features an output discharge for fast turn off.
SiP32451, SiP32452 and SiP32453 are available in compact
wafer level CSP package, WCSP4 0.8 mm x 0.8 mm with
0.4 mm pitch.
FEATURES
• Low input voltage, 0.9 V to 2.5 V
• Low R
ON
, 55 m typical
• Fast turn on time
• Low logic control with hysteresis
• Reverse current blocking when disabled
• Integrated pull down at EN pin
• Output discharge (SiP32451)
• 4 bump WCSP 0.8 mm x 0.8 mm with 0.4 mm pitch
package
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?9991
APPLICATIONS
• Battery operated devices
• Smart phones
• GPS and PMP
• Computer
• Medical and healthcare equipment
• Industrial and instrument
• Cellular phones and portable media players
• Game console
TYPICAL APPLICATION CIRCUIT
Figure 1 - SiP32451, SiP32452, and SiP32453 Typical Application Circuit
SiP32451, SiP32452, SiP32453
IN
V
OUT
OUT
V
IN
GND
GND
GND
EN
EN
C
IN
C
OUT