NXP reserves the right to change the detail specifications as may be required to permit
improvements in the design of its products.
NXP Semiconductors Document Number: MPXH6400A
Data Sheet: Technical Data Rev. 6, 03/2017
© NXP B.V. 2017
MPXH6400A, 20 to 400 kPa, Absolute,
Integrated Pressure Sensor
The NXP MPXxx6400A series sensor integrates on-chip, bipolar op amp circuitry
and thin film resistor networks to provide a high output signal and temperature
compensation. The small form factor and high reliability of on-chip integration
make this pressure sensor a logical and economical choice for the system
designer.
The MPXxx6400A series piezoresistive transducer is a state-of-the-art,
monolithic, signal conditioned, silicon pressure sensor. This sensor combines
advanced micromachining techniques, thin film metallization, and bipolar
semiconductor processing to provide an accurate, high level analog output signal
that is proportional to applied pressure.
Features
Improved accuracy at high temperature
Available in super small outline package
1.5% maximum error over 0 °C to 85 °C
Fully calibrated and compensated
Ideally suited for microprocessor or microcontroller-based systems
Temperature compensated from -40 °C to +125 °C
Durable thermoplastic surface mount package
Package porting and mounting options enable tube attachment for liquefied
natural gas (LPG) or remote sensing applications
Typical applications
Fuel injected car engines
Vehicles powered by green gases (for example LPG and CNG)
Small engines
Industrial controls
Ordering information
Part number Shipping Package
# of Ports Pressure type
Device
marking
None Single Dual Gauge Differential Absolute
Super Small Outline Package (Media resistant gel)
MPXH6400AC6U Rail 98ARH99089A MPXH6400A
MPXH6400AC6T1 Tape and Reel 98ARH99089A MPXH6400A
MPXHZ6400A6T1 Tape and Reel 98ARH99066A MPXHZ6400A
MPXHZ6400AC6T1 Tape and Reel 98ARH99089A MPXHZ6400A
MPXH6400A
Super small outline package
Top view
Pinout
Pin 1 identification,
chamfered corner.
1
2
3
45
6
7
8
DNC
DNC
DNC DNC
DNC V
S
GND
V
OUT
MPXH6400AC6U/6T1/
MPXHZ6400AC6T1
Case 98ARH99089A
MPXHZ6400A6T1
Case 98ARH99066A
MPXH6400A
Sensors
2 NXP B.V.
Related Documentation
The MPXxx6400A device features and operations are described in a variety of reference manuals, user guides, and application
notes. To find the most-current versions of these documents:
1. Go to the MPXx6400 web page at http://www.nxp.com/products/:MPXx6400.
2. Click the Documentation tab.
Contents
1 General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Mechanical and Electrical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Maximum ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 Operating characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 On-chip Temperature Compensation and Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 Package Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.1 Minimum recommended footprint for surface mounted applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.2 Package Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5 Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
MPXH6400A
Sensors
NXP B.V. 3
1 General Description
1.1 Block diagram
Figure 1 shows a block diagram of the internal circuitry integrated on a pressure sensor chip.
Figure 1. Integrated pressure sensor block diagram
1.2 Pinout
Figure 2. Device pinout (top view)
Table 1. Pin functions
Pin Name Function
1 DNC Do not connect to external circuitry or ground. Pin 1 is notated by chamfered corner.
2V
S
Voltage supply
3 GND Ground
4V
OUT
Output voltage
5 DNC Do not connect to external circuitry or ground.
6 DNC Do not connect to external circuitry or ground.
7 DNC Do not connect to external circuitry or ground.
8 DNC Do not connect to external circuitry or ground.
V
OUT
V
S
Sensing
Element
GND
Thin Film
Temperature
Compensation
and Gain
Gain Stage #2
and
Ground
Reference
Shift Circuitry
Pins 1, 5, 6, 7, and 8 are internal device connections.
Do not connect to external circuitry or ground.
Stage #1
Pin 1 identification,
chamfered corner.
1
2
3
45
6
7
8
DNC
DNC
DNC DNC
DNC V
S
GND
V
OUT

MPXH6400A6U

Mfr. #:
Manufacturer:
NXP / Freescale
Description:
Board Mount Pressure Sensors INTEG SSOP 20-400KPA
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union