5.00100.2210000

E-BOX
The Housing for RAFIX 22 FS Control Components
2
E-BOX
Housing for RAFIX 22 FS Control Components
The RAFIX 22 FS E-Box is an elegant, extremely well-
designed housing for control components. It can be used
wherever individual control component units are required
in remote places. Very typical, for example, for Emergen-
cy-Stop applications along a production line or on the
safety fence.
The dimensions of the RAFIX 22 FS E-BOX and also the
assembly concept are based on the edge dimension of a
40 mm profi le rail.
Simple assembly concept, based on 40 mm profi le rails
N
Insert metal clip in profi le
rail slot (locating noses on
the clip ensure precise
adjustment, x with only
one screw)
N
The metal clip can also be
screwed onto other surfaces.
N
Mount housing bottom part
N
Attach contact module
N
Insert the wires
N
Connect the terminals
N
Insert RAFIX 22 FS actuator
(e.g. Emergency-Stop) into
housing top part
N
Fix actuator with a ring nut
N
Snap housing top part onto
bottom part. Done!
Drilling pattern for direct mounting with screws
N
As an alternative to mounting
with the metal clip, the bottom
of the housing can be attached
directly with M4 screws.
Cable inlet
on bottom
Cable inlet
on side
3
N Extremely compact (dimensions 109 x 40 x 27 mm)
N Suitable for actuators from the RAFIX 22 FS control
unit range (ø 22.3 mm)
N With yellow housing cap for Emergency-Stop actuator
N With grey housing cap for standard actuators (such as
pushbuttons)
N Fixing
N with the timesaving one-hole screw attachment meth-
od, particularly suitable for aluminium profile rails
N or alternatively by direct attachment with M4 screws
N Includes cable lead-in for direct cabling
N side: M16
N bottom: M20
Technical data
N Protection as per EN 60529: IP 65
N Protection class II
N Temperature range as per IEC 60947-5-1 ¹
¹ Depending on actuators used
Housing
Contact module
N With RAFIX 22 FS contact block for
N Emergency-Stop actuator or
N Standard actuator
N Contact block with 2 contact cavities
(for Emergency-Stop “PLUS1” with 3 contacts)
N Option with LED for illuminated actuator components
N Line connection (max. 1.5 mm²)
N in bottom of housing
N with spring clamp (rigid wire, wire with or without cable
end sleeve)
General information: contact modules
N Working temperature: -40 °C - +85 °C
N Storage temperature: -40 °C - +85 °C
N Shock resistance as per EN 60068-2-27
N Vibration resistance as per EN 60068-2-6
N Resistance to environmental conditions as per EN 60068-2
Technical data
Contact module with gold contact blocks
N Electrical characteristics:
N operating voltage AC/DC min. 5 V
N operating voltage AC/DC max. 35 V
N operating current AC/DC min. 1 mA
N operating current AC/DC max. 100 mA
N switching capacity max. 250 mW
N Life cycle at 10 mA / 24 V DC 1,000,000
(Emergency-Stop “PLUS1”: 50,000)
Technical data
Contact module with silver contact blocks
N Electrical characteristics as per IEC 60947, AC-15, DC-13:
N rated insulation voltage AC/DC min. 250 V
N rated impulse voltage 2500 V
N rated operating current
IE, AC15 B300 3 A/ 120 V;
1.5 A / 240 V
I
the
: 5 A
N rated operating current
IE, DC13 Q300 550 mA/120 V;
270 mA / 240 V
I
the
: 2.5 A
N Life cycle (min.)
N 1,000,000 at 250 V / 1 A
N 100,000 at 250 V / 2 A
N 30,000 at 250 V / 4 A

5.00100.2210000

Mfr. #:
Manufacturer:
Description:
Pushbutton Switches E-Box Switch Module 2 NC Gold Contacts
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet