POE370U Characteristics WWW.PHIHONG.COM
INPUT:
AC Input Voltage Range
90 to 264VAC
AC Input Voltage Rating
100 to 240VAC
AC Input Current
5.5A (RMS) maximum for 90VAC
2.75A (RMS) maximum for 240VAC
Leakage Current
3.5mA maximum @ 254VAC 60Hz
AC Input Frequency
47-63Hz
AC Inrush Current
30A (RMS) maximum for 115VAC
60A (RMS) maximum for 230VAC
OUTPUT:
Total Output Power
15.4W per port
Ripple and Regulation
100mV maximum
Efficiency
75% (typical) at maximum load, and 120VAC 60Hz
Hold-up Time
16mS min. 120VAC at maximum load
Transient O/P Voltage Protection
60V maximum at switch on and off at any AC line Phase
Turn-On Delay Time
3 sec maximum at maximum load, and 120VAC 60Hz,
25Hz
ENVIRONMENTAL:
Temperature
Operation 0 to +40°C
Non-operation -25 to +65°C
Humidity
Operation 5 to 90%
Non-Operation 5 to 90%
EMC
En55022 Class B, FCC Class B with FTP cabling
EN55022 Class A, FCC Class A with UTP cabling
Isolation Test
Primary to Secondary: 4242VDC for 1 minute
Primary to Ground: 2121VDC for 1 minute
Secondary to Ground: 2121VDC for 1 minute
Immunity EN50082-1
ESD: EN61000-4-2. Level 3
RS: EN61000-4-3. Level 2
EFT: EN61000-4-4. Level 2
Surge: EN61000-4-5. Level 3
CS: EN61000-4-6. Level 2
Voltage Dips EN61000-4-11
Harmonic: EN61000-3-2 Class A
IEEE 802.3af Interoperability
UNH Interoperability report available on request
FEATURE:
Cisco Legacy detection
No extern parts required for Legacy devices:
VoIP Phones:
7910, 7912, 7940, 7960
Access Points:
350, 1100, 1200
Over Voltage/Current, Short Circuit Protection
Outputs equipped with short circuit protection and
overload protection as per 802.3af specifications
The output can be shorted permanently without damage
Over Temperature Protection
Automatic shutdown without damage
Indicators
Green LED: Power detected “ON”
Yellow LED: Fault detected
USB Diagnostics Port
USB “B” port for diagnostics and manual port control
Windows GUI
Input Connector
AC
IEC320 inlet 3 pin
DC for RPS option
Molex Minifit
Shell 39-01-20-65
Pins 39-00-0077
Warranty
Limited Lifetime Warranty
