Vibration Power OFF
Power OFF
Power OFF
Power ON
Power OFF
Power OFF
Shock
High temperature
exposure
Low temperature
exposure
Humidity
Thermal shock
Power OFF
Power ON
REC16/RES16
OPTICAL ENCODERS
OWithout snap-in holder
■
OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ± 0.4 (Unit: mm)
160.5
4.7
16
6
5.5
C 0.5
0
–0.1
φ
10.3
3
5.55
0
–0.06
φ
14
(23)
5 1.5
(4.5)
(4.8)
10 ± 0.5
M 9 P = 0.75
5– 2
6–
□
0.5
654321
Shaft (Plastic)
Pin No.
※
Connector
:
Made by Hirose Electric Co., Ltd.
A4B-6PA-2DSA
Test item
■
RELIABILITY TEST
The output shall satisfy the criteria below after the following tests.
Test conditions
Amplitude : 1.52 mm or 98.1 m/s
2
(10 G) whichever is smaller.
10 ~ 500 Hz excursion 15 min/cycle, 8 cycles each for X, Z, directions.
3 times each in directions (X, Z) at 490 m/s
2
(50 G), 11 ms.
80 °C 96 h
(To be measured after leaving samples for 1 h at normal temperature and
humidity after the test.)
50 °C 96 h
− 20 °C 96 h
0 °C 96 h
40 °C Relative humidity 90 ∼ 95 % 96 h
(To be measured after wiping out moisture and leaving samples for 1 h at normal temperature and humidity after the test.)
To be done 10 cycles with the following condition
(To be measured after leaving samples for 1 h at normal temperature and humidity after the test.)
80 °C 0.5 h、− 20 °C 0.5 h