Evaluation Kits
- 77 -
www.nve.com phone: 952-829-9217 fax: 952-829-9189
AG920-07 GT Sensor Evaluation Kit
This kit was created to facilitate laboratory
experimentation and development using NVE’s GT
Sensor products. Because of the wide variety of
mechanical orientations where these sensors can be
used, this kit contains a large variety of circuit boards
to simplify the customer’s fixturing and testing of the
parts. Included in the kit are one of each type of
NVE’s GT Sensor products, both analog and digital,
plus two of the DD001-12 signal processing ICs to
convert the analog output of the ABL sensors digital.
The contents are listed below:
Quantity Part Number Marking Description
1 ABL004-00 FDB Single Differential Sensor, 1.0mm Element Spacing
1 ABL005-00 FDC Single Differential Sensor, 0.5mm Element Spacing
1 ABL014-00 FDD Dual Differential Sensor, 1.0mm Element Spacing,
0.5mm Phase Shift
1 ABL015-00 FDF Dual Differential Sensor, 0.5mm Element Spacing,
0.25mm Phase Shift
1 AKL001-12 P/N Digital Output Differential Sensor, 1.0mm Element
Spacing
1 AKL002-12 P/N Digital Output Differential Sensor, 0.5mm Element
Spacing
2 DD001-12 P/N Digital Output Signal Processing IC for ABL Sensors
2 AG915-06 N/A M8 Round PCB, for mounting ABL Sensor
2 AG914-06 N/A M10 Round PCB, for mounting AKL Sensor
1 AG918-06 N/A Long, Narrow PCB for Mounting ABL Sensor Parallel to
Long axis
1 AG919-06 N/A Long, Narrow PCB for Mounting ABL Sensor
Perpendicular to Long axis
1 AG913-06 N/A PCB for Mounting 2 DD001-12 ICs
1 AG916-06 N/A Long, Narrow PCB for Mounting AKL Sensor
Perpendicular to Long axis
1 AG917-06 N/A Long, Narrow PCB for Mounting AKL Sensor Parallel to
Long axis
1 AG911-06 N/A Long, Narrow PCB for Mounting ABL Sensors Parallel to
Long axis, and 1 or 2 DD001-12 ICs
1 AG912-06 N/A Long, Narrow PCB for Mounting ABL Sensors
Perpendicular to Long axis, and 1 or 2 DD001-12 ICs
5 12216 N/A 6mm Diameter X 4mm Thick Round Ferrite Magnets
5 12217 N/A 3.5mm Diameter X 4mm Thick Round Ferrite Magnets
