851-800-526-2324 • www.us.tdk-lambda.com/lp/ Disclaimer: us.tdk-lambda.com/lp/legal.htm
PFE300-700S Series
Features
Low profi le, small size
100°C baseplate temperature
High power density
High Effi ciency
Suitable for conduction cooling
Power Factor Corrected (PFC)
300 to 700W AC-DC Power Module
Notes: (Consult Installation Manual for detailed specifi cations, test methods and application notes)
1) External components are required, consult Application Notes
2) PFE500S-12, -40 to 85°C. See instruction manuals for derating curves
3) Reduced PFC above 63Hz. Contact technical support for 440Hz operation.
PFE300S PFE700S
Model PFE500S
AC Input VAC 85 to 265VAC, 47-63Hz (up to 440Hz) (3)
Input Current (100 / 220VAC) A 4.0 / 2.0 8.8 / 4.4
Model dependant 6.2 / 3.2
Inrush Current (100 /200VAC) (1) A 20 / 40 peak
Power Factor - 0.95 minimum, meets EN61000-3-2
Output Voltage Setpoint Accuracy - ±2% ±1V
Ripple and Noise (1) - 1% 4V
Over Current Protection % 105 - 140% (Automatic Recovery)
Over Voltage Protection - 125 - 145% 60 - 69.6V
Series Operation - Yes
Parallel Operation - No Yes (Droop mode)
Power On Signal (ENA) - Open collector (10mA sink current). Low (on) when output is present
Auxiliary Supply - None None
Remote On/Off (Opto isolated) - None None
Overtemperature Protection - Yes
Operating Baseplate Temp. °C -40 to +100°C (2)
Storage Temperature °C -40 to +100°C
Humidity (non condensing) - Operating: 20 - 95%RH, Non Operating: 10 - 95%RH
Cooling - Conduction
Withstand Voltage (1 min) - Input to Output 3kVAC, Input to Baseplate 2.5kVAC, Output to Baseplate 1.5kVDC
Isolation Resistance - Output to baseplate: 100M Ohm at 500VDC, 25°C ambient, 70%RH
Vibration (non operating) - 10-55Hz (1 min sweep), constant amplitude 0.825mm (max 49m/s
2
), X, Y, Z 1 hour each
Shock - 196.1m/s
2
Safety Certifi cations - UL60950-1, CSA60950-1 (cUL), EN60950-1, CE mark (LVD)
Weight g 250 250
Size (WxHxL) mm 61 x 12.7 x 116.8mm
in 2.4 x 0.5 x 4.6”
Warranty yrs 2 years
Specifi cations
Key Market Segments & Applications
